• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help Identifying Plugs on 89 5.0 Harness

  • Thread starter Thread starter monk302
  • Start date Start date Mar 25, 2006

monk302

Founding Member
Apr 18, 2001
742
2
16
New Jersey
Mar 25, 2006
#1
  • Mar 25, 2006
  • #1
Hey everyone,

I am on the Classic forum most of the time but was hoping that you could help me. I am currently doing the EFI swap and I am trying to figure out my harness that I am attempting to modify. Basically I want to take out what I don't need. I have figured out most of the connections but there are still a few that are bewildering me. If you could lend your expertise on the 5.0 EFI engines to me it would be greatly appreciate.

Thanks,

Mike

Here are the pictures. Sorry for quality on some.

Image 1 (These two are white cylinders about 1'' long or so)


Image 2
 

Attachments

  • 2Whitetopview.webp
    14.3 KB · Views: 151
  • Black1.webp
    18.1 KB · Views: 173

monk302

Founding Member
Apr 18, 2001
742
2
16
New Jersey
Mar 25, 2006
#2
  • Mar 25, 2006
  • #2
Image 3


Image 4

 

Attachments

  • Elbow.webp
    9.1 KB · Views: 176
  • Black3.webp
    13.3 KB · Views: 148

monk302

Founding Member
Apr 18, 2001
742
2
16
New Jersey
Mar 25, 2006
#3
  • Mar 25, 2006
  • #3
Image 5


Image 6
 

Attachments

  • FuelInjectorHarness.webp
    23.8 KB · Views: 157
  • Gray1prongs.webp
    26.6 KB · Views: 181

monk302

Founding Member
Apr 18, 2001
742
2
16
New Jersey
Mar 25, 2006
#4
  • Mar 25, 2006
  • #4
Image 7


Image 8
 

Attachments

  • Green.webp
    12.3 KB · Views: 167
  • White.webp
    23.3 KB · Views: 172

86T-Top

Founding Member
Jun 29, 2001
553
0
17
Dublin, PA
Mar 25, 2006
#5
  • Mar 25, 2006
  • #5
Elbow.jpg - is the vaccum connector for the FPR
balck3.jpg - looks like the connector for you EGR position sensor, but I can't be sure from that picture.

Mario
 

monk302

Founding Member
Apr 18, 2001
742
2
16
New Jersey
Mar 26, 2006
#6
  • Mar 26, 2006
  • #6
Thanks for the reply Mario. With an older Mustang do I need the EGR?
 

SPEEDYLIFSAVR

Founding Member
Sep 18, 2000
666
0
16
FL,89 LX 5.0
Mar 26, 2006
#7
  • Mar 26, 2006
  • #7
Image 3 looks like the connection for the Temp sending unit which sits right on the front of the lower intake .
 
T

TENGRAM

New Member
Mar 18, 2006
143
0
0
Mar 26, 2006
#8
  • Mar 26, 2006
  • #8
this site should help:
http://fordfuelinjection.com/?p=6
 
J

JRPony

New Member
Jun 10, 2005
83
0
0
Las Vegas, NV
Mar 26, 2006
#9
  • Mar 26, 2006
  • #9
Try this site:
http://www.therangerstation.com/tech_library/Wiring_harnesses.htm

Image 5: I think those are secondary air connectors.
Image 6: I think that one sends various signals to the dash along with a black connector simiilar to that one.
Image 7: I believe is the connector near the PCM that has the various fuel pump signals.
 
J

JRPony

New Member
Jun 10, 2005
83
0
0
Las Vegas, NV
Mar 26, 2006
#10
  • Mar 26, 2006
  • #10
Also, I have an 89 harness in my 88 and I don't remember those white connectors in image 1. I have heard that the 90 and later harnesses have 2 white connectors for the airbags that are near the firewall grommet. Where are those connectors located in the harness?
 

soylentgreen

Member
Jun 17, 2003
102
7
18
Mar 26, 2006
#11
  • Mar 26, 2006
  • #11
SPEEDYLIFSAVR said:
Image 3 looks like the connection for the Temp sending unit which sits right on the front of the lower intake .
Click to expand...
I agree.
 

soylentgreen

Member
Jun 17, 2003
102
7
18
Mar 26, 2006
#12
  • Mar 26, 2006
  • #12
Image 1: Throttle position sensor (left connector).
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 26, 2006
#13
  • Mar 26, 2006
  • #13
See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/

http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

http://www.veryuseful.com/mustang/tech/engine/images/88-91eecPinout.gif

Diagram courtesy of Tmoss & Stang&2birds
http://www.veryuseful.com/mustang/tech/engine/images/mustangEngineHarness.gif



http://www.veryuseful.com/mustang/tech/engine/images/mustangMainHarness.gif\
 

Attachments

  • mustangEngineHarness.gif
    78.3 KB · Views: 119
  • mustangMainHarness.gif
    84.7 KB · Views: 139
You must log in or register to reply here.

Similar threads

1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
228
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
Help Identifying Engine Harness Plug
  • FoxbodyRob
  • Feb 7, 2026
  • 2.3L (N/A & Turbo) Tech
Replies
3
Views
190
2.3L (N/A & Turbo) Tech Feb 7, 2026
FoxbodyRob
8
Wiring ID 89 5.0
  • 89_Vert_Gang
  • Feb 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
273
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 17, 2025
Jarhead67
J
S
Fuel rail help
  • stang9150
  • Mar 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
300
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 5, 2026
stang9150
S
5
Hello fellow Mustang fanatics.
  • 580HP*428Cj
  • Apr 2, 2026
  • The Welcome Wagon
Replies
2
Views
190
The Welcome Wagon Apr 2, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?