• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help installing reverse glow gauges

  • Thread starter Thread starter BLADDER92FOX
  • Start date Start date May 23, 2006

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
May 23, 2006
#1
  • May 23, 2006
  • #1
I just received these reverse glow gauges in the mail:


I'm installing them on now,but it says to connect one wire to the ground and one wire to the dash power source.the wires are red and black but i left the intrustions out there in my car now. Where do i connect them to tghen,Can anyone plese help.
 

Attachments

  • RIG-284.webp
    24.9 KB · Views: 958

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
May 23, 2006
#2
  • May 23, 2006
  • #2
I connected mine to the parking light switch. That way they only come on when I need the lights. You can also run them to your radio ignition/switched wire. That way when you turn on the ignition they power up. I have the silver/reverse glow ac set also with mine. They say they don't match but you can hardly tell the difference. Also Faze gauges at autozone match almost perfect to the color in the inner circle of the tachs.
 

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
May 23, 2006
#3
  • May 23, 2006
  • #3
It says to plug the red wire to the parking light switch and the black to the ground.Can i connect the black cable to the metal bar uder the dash??and also which one of the parking light wires do i connect the red wire to?
 

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
May 23, 2006
#4
  • May 23, 2006
  • #4
I need help soon cause its going to be dark.I need to know what color wire do i connect the red wire to. All the wires from the parking light swtch have 2 colors on them also. Should i try them all?
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
May 23, 2006
#5
  • May 23, 2006
  • #5
Yes, or you can run it to the metal under the kick panel and use that. Also, the dash has a bracket the connects to the trans tunel. Remove the radio and you'll see the two nuts that connect it. You could remove the screw that attaches to the side. I used the fire wall.
 

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
May 23, 2006
#6
  • May 23, 2006
  • #6
I got it working,looks awesome. I'll post pics later on.my dash is taken half apart still cause i have to drill holes tomorrow to mounth the switch,and also my needle for the temp gauge is stuck,but i know what to do to it.
 

smokin91'

New Member
Feb 19, 2006
204
2
0
May 23, 2006
#7
  • May 23, 2006
  • #7
drill holes to mount the switch? did you get the cheap ebay ones?? you should have gotten the eurolight ones. Mine have a thin pushbutton switch that is reverse glow like the lights. Heres a picture of it, its kinda blurry.

 

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
May 24, 2006
#8
  • May 24, 2006
  • #8
I got them from procarparts.com. And they have a dimmer control switch and a green to blue switch. Here's some pics of them when its about evening time yesterday but without putting the dash cover back on:



I'll take some more pics tonight when its really dark out and with my dash completly on.
 

Attachments

  • Picture062.webp
    37.9 KB · Views: 510
  • Picture065.webp
    32.4 KB · Views: 442

BLADDER92FOX

Member
Apr 4, 2005
153
0
17
Miami
May 25, 2006
#9
  • May 25, 2006
  • #9
Ok,here are some better pics and here's a video link that i also made so you can see the gauges in action.



Here's the switch for them:

And here's the video:
http://www.youtube.com/watch?v=w5SbkzcNUOo
 

Attachments

  • Picture081.webp
    27 KB · Views: 355
  • Picture098.webp
    53.9 KB · Views: 329
  • Picture104.webp
    48.5 KB · Views: 351
  • Picture086.webp
    14.2 KB · Views: 275
You must log in or register to reply here.

Similar threads

T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
220
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
253
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
J
Fox Lost all gauge cluster function after Holley Terminator X install (solved)
  • Justin17383
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
276
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 13, 2026
2000xp8
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
197
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
269
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?