• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

HELP new 347 smoking

  • Thread starter Thread starter curtisimo81
  • Start date Start date Apr 26, 2006

curtisimo81

New Member
Jun 3, 2005
33
0
0
pensacola,fl
Apr 26, 2006
#1
  • Apr 26, 2006
  • #1
hey i just built a 347 stroker motor, i have keith black forged pistons hawks racing nodular iron crank, i beam connecting rods, molly rings, gt 40p heads with 1.90 intake and 1.65 exhaust valvs. ok just a brief discription of my motor not for the problem, after my motor warms up 10-15 mins it starts smoking a whitish bluish smoke, smells like oil burning, did a compression test and i have about 145-150lbs in all 8 cycl. any ideas on what would cause this problem, with having great comp. and it taking about 15 mins to start smoking its got me fooled any help or isight will be greatly appreiciated.

Thanks Curtis
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 27, 2006
#2
  • Apr 27, 2006
  • #2
perhaps a little blow by and it takes 10 min to pressurize the crank area? any chance a oil ring not installed or is stuck and not cleaning cylinders? have you checked behind the TB to see if you are putting excessive amounts of oil into the intake? via the pvc.
 

TheBocSez

New Member
Feb 3, 2004
652
0
0
Converse, TX
Apr 27, 2006
#3
  • Apr 27, 2006
  • #3
What about the heads? Worn guides or seals maybe?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 27, 2006
#4
  • Apr 27, 2006
  • #4
TheBocSez said:
What about the heads? Worn guides or seals maybe?
Click to expand...
i worndered this myself but usally when this is the case on intial start up you puff blue.
 
9

93gt1217

New Member
Mar 30, 2005
18
0
0
Apr 27, 2006
#5
  • Apr 27, 2006
  • #5
are you still breaking the motor in? A friend of mine re-did his and didnt let the rings seat in, he beat on his car and he had blow by because of that.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,077
1,659
194
NJ
Apr 27, 2006
#6
  • Apr 27, 2006
  • #6
If the motor is done correctly, my money is on the intake gaskets.
 
W

wazazzle

New Member
Mar 30, 2005
618
1
0
In the dumpster behind McDonalds. WA
Apr 27, 2006
#7
  • Apr 27, 2006
  • #7
I've always heard you're supposed to run regular oil and take it easy for the couple hundred miles if not 1,000. There would be normal smoke from exhaust because it will take time for the rings to set, but then you switch to synthetic. There shouldn't be a problem after that if it sets right, and if you didn't beat on it during the break in period. That's what I've always thought.
 

nvrenuff

Member
Apr 9, 2006
32
0
6
Red Deer, Alberta
Apr 27, 2006
#8
  • Apr 27, 2006
  • #8
oil into the intake? via the pvc.
Click to expand...

This is exactly what mine was doing after my 306 went in, good compression and everything just like yours. Mine would smoke excessively intermittantly and then not smoke at all for a few minutes. I ended up plugging the PCV and went with a valve cover breather, no more smoking.

check out this thread:http://forums.stangnet.com/showthread.php?t=632658
 

Skoobie

Damn...Tyler65's hot!
May 25, 2003
655
0
17
Vancouver, WA
Apr 28, 2006
#9
  • Apr 28, 2006
  • #9
Is a valve cover breather sufficient to replace the PCV? How would replacing it in this way effect your over all vacuum?
 

curtisimo81

New Member
Jun 3, 2005
33
0
0
pensacola,fl
Jul 12, 2006
#10
  • Jul 12, 2006
  • #10
Sorry it took so long to get back, went out of town for a few weeks, I haven't run the motor over about 3g, as far as the break in i dont have a 100 miles on the motor. I'm affraid to mess it up any more than it already is, had a few peep tell me they think its gas, not really sure though, changed the holley to and edlebrock to eliminate blown power valve, still smoking. the main thing thats got me stumped the engine ran for about an 1hour right after i put it in and no smoke, was running rich, so my boss tried tuing the carb some, it started smoking, and hasn;t stopped since. please and input will help
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 12, 2006
#11
  • Jul 12, 2006
  • #11
a wet/dry compression test will rule out alot...i sent you a pm you never replied if the heads were rebuilt with new valve guides but i would run the wet/dry compression test this will tell you if it is the valve guides. if you do post results and read link below for info. on running a wet/dry compression test and also if you don't have a compression tester wal mart sells them for about $20....
http://www.pumaracing.co.uk/comp.htm
 

curtisimo81

New Member
Jun 3, 2005
33
0
0
pensacola,fl
Jul 13, 2006
#12
  • Jul 13, 2006
  • #12
thanks for the info i have a compression tester and i'm probably gonna do the test tonight if not tonight then this weekend. thanks
 
You must log in or register to reply here.

Similar threads

S
  • Locked
TURN-KEY TURBO BIG BORE 347 DSS AFR 614 RWHP/657 RWTQ
  • speedshifter
  • Feb 6, 2011
  • Engine and Power Adder Parts
Replies
2
Views
8K
Engine and Power Adder Parts Feb 27, 2011
speedshifter
S
X
Smoking, idle problems 94 5.0 Help!!!
  • xtr3m3
  • Jan 6, 2007
  • 1994 - 1995 Specific Tech
Replies
10
Views
815
1994 - 1995 Specific Tech Jan 10, 2007
xtr3m3
X
My New 03 Terminator
  • Creepy847
  • Apr 27, 2007
  • SVT Tech Forum
Replies
12
Views
2K
SVT Tech Forum May 5, 2007
RB88
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?