Help removing the keyless entry module support (pic)

A

Andre_Lutz

New Member

Feb 18, 2007

5

0

0

Dec 22, 2007

#1

• Dec 22, 2007

• #1

Hello

I need instructions of how to remove the support of the keyless module, the Ford's service manual says only: Disengage retaining tabs on relay mounting panel and lower relay mounting panel But it don't give any other instruction. I tried to remove it by many ways but i wasn't sucessful and i don't want to brake anything. How do i remove these clamps?


<a href="http://img510.imageshack.us/my.php?image=antiteftsuportwe4.jpg" target="_blank"><img src="http://img510.imageshack.us/img510/7986/antiteftsuportwe4.th.jpg" alt="Free Image Hosting at www.ImageShack.us" border="0"/>/a>

Thanks

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Dec 22, 2007

#2

• Dec 22, 2007

• #2

if i remember correctly they just pull straight out. i think i used a claw hammer to pry at em

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Dec 22, 2007

#3

• Dec 22, 2007

• #3

For confirmation of what Mr Urban said (not that it's needed), you could see if you can PM Bill302. He had a nice thread about installing a keyless brain. He might remember how it went in (ergo how it would come out. Or maybe he even removed his old one first if it was toast).

Good luck.

 

A

Andre_Lutz

New Member

Feb 18, 2007

5

0

0

Dec 23, 2007

#4

• Dec 23, 2007

• #4

Thank you for the the help. It was easier than I thought, just needed no pull te head of the clamp to remove them.

 

MysteryMachine

Active Member

Jun 21, 2003

1,835

2

39

Parkesburg, PA

Dec 23, 2007

#5

• Dec 23, 2007

• #5

why are you taking it out? If your getting rid of it and it works let me know Ive been looking for one of them. Well I'm looking the electronic part not the bracket