• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

**help** Rough Idle & Acceleration

  • Thread starter Thread starter Andrew Smith
  • Start date Start date Oct 27, 2012
A

Andrew Smith

New Member
Oct 27, 2012
1
0
1
Oct 27, 2012
#1
  • Oct 27, 2012
  • #1
- 2004 V6 Mustang -

1. When starting the car the engine usually idles roughly and is very " jumpy".

2. When accelerating at low rpms the car is very "jerky" - "shaky" and I sometimes hear a loud "bang" - "pop" noise like something in the engine is getting hit (only hear it once and doesn't happen often).

**I replaced the fuel filter. When replacing it I disconnected the fuel inertia switch (if that's what its called) and started the car. The feeling the engine had when it was using up the rest of the fuel in the line (jumpy and sputters) is how my car feels when accelerating.**


- What I have replaced -

1. Fuel Filter

2. Spark Plugs

3. Spark Plug Wires


- I am on a very tight budget which is why I haven't taken it into a shop. When I'm on the highway or at higher speeds (not accelerating) the car runs normal. I have been reading online and have seen things about dirty throttle body, dirty fuel injectors, vacuum leaks?

- If anyone could help or have any idea what could be the problem please let me know. Thank you.

----Additional information: My check engine light has Not come on. Sometimes when I start it up, white-gray smoke comes out of the exhaust. Also my gas millage is HORRIBLE. It gets about 18mpg on the interstate.----
 

wmburns

SN Certified Technician
Aug 14, 2009
5,892
514
204
Houston Texas
Oct 29, 2012
#2
  • Oct 29, 2012
  • #2
Does the motor run better once it has reached full operating temperature? Does the motor run hot (or has overheated in the past)?

When the spark plugs were changed, what were their condition?

When the spark plug wires were changed did you use all factory standoffs and looms? Did you follow factory routing?

Does the motor "burn" coolant?

Take the car to your local auto parts store and have the alternator tested for excessive AC ripple (bad alternator diode). Most auto stores will do it for free.

Try this trick. Cycle the key on/pause/off several times without cranking. Now start the motor. Does this improve starting? If so, suspect fuel pressure leak down.

Are you positive there aren't any vacuum or exhaust leaks? Don't cut corners here as even a tiny leak will cause issues.

When was the last time the MAF was cleaned? If it's been a while, clean the MAF. Use only products designed for the job.
 
You must log in or register to reply here.

Similar threads

P
Repeated P2004 DTC trouble code with no apparent symptoms
  • poehitman
  • Mar 11, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
157
SN95 V6 Mustang Tech Mar 12, 2026
poehitman
P
L
1997 V6 Starting issue
  • leanzik04
  • Mar 20, 2026
  • SN95 V6 Mustang Tech
Replies
3
Views
202
SN95 V6 Mustang Tech Mar 20, 2026
Noobz347
I
98 Mustang GT dying
  • ItsMason
  • May 14, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
55
1996 - 2004 SN95 Mustang -General/Talk- May 16, 2026
roblabsn95
R
0
'04 V6 running rich excessively on both banks
  • 04DSGVert
  • Oct 26, 2025
  • SN95 V6 Mustang Tech
Replies
2
Views
293
SN95 V6 Mustang Tech Oct 27, 2025
04DSGVert
0
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
634
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?