help!!! tachometer and battery and temp. gauge stopped working???

D

dfresh5050

Founding Member

Mar 26, 2001

106

0

0

Jul 23, 2005

#1

• Jul 23, 2005

• #1

I changed my ignition switch and after I put the new in, the tach. and temp. and battery gauges all stopped working?? then i tried putting the old switch back the gauges still wont work.

I need help!!
Did I loosen a wire somewhere or blow a inline fuse or something??
I checked the fuse box and all those fuses were fine.

All help would be appreciated, thanx.

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jul 23, 2005

#2

• Jul 23, 2005

• #2

I am having a brain fart. If those gauges are all on the same side of the cluster, I would look for a loose wiring connector/connection.

Good luck.

 

Euphoric306

New Member

Apr 5, 2004

905

0

0

Jul 24, 2005

#3

• Jul 24, 2005

• #3

i might try replacing gauge voltage regulator, you might have fried that accidentally..

but yeah they are all on the same side,
is ur fuel and oil pressure gauges still working?

 

D

dfresh5050

Founding Member

Mar 26, 2001

106

0

0

Jul 24, 2005

#4

• Jul 24, 2005

• #4

my fuel and oil pressure gauges r working fine. what does that fuse look like and where is it exactly?? any help is appreciated, thanx

r the tach and oil pressure coming from the same wire, it looks like they seperate but they go through the same coil of wires?????

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jul 24, 2005

#5

• Jul 24, 2005

• #5

The gauges on a given side of the cluster tend to share a harness (and if that harness is disturbed, one side will work and the other might not). There is no fuse that I know of. It would be an electrical connector/connection or a ground wire which might have been tampered with that could cause this issue.