Help with Egr

B

bboylobo

New Member

May 4, 2005

130

0

0

Lancaster PA

Apr 29, 2009

#1

• Apr 29, 2009

• #1

I amputated the k member from my stang because im in the middle of my header and xpipe install. i cant seem to get the egr valve off of the manifold. i tried spraying it with pb blaster and using an adjustable but it wont budge.

anyone have some tips on removing this pipe. its holding up my install at the moment. i dont know the exact size of the nut. I tried all my open head wrenches and none of them fix. Im probably missing the one that is the right size. any help is appreciated.

 

squeak93

15 Year Member

Jun 2, 2005

2,331

408

164

Joplin, Missouri

Apr 29, 2009

#2

• Apr 29, 2009

• #2

BFH it.. Its a real tough one to get to break loose. Pb blaster and keep working on it. Maybe a breaker bar if you can get one one in there.

 

J

jomull55

New Member

May 20, 2007

202

0

0

lucas, OH

Apr 29, 2009

#3

• Apr 29, 2009

• #3

i had the same problem, gave it some heat with the oxy acetelene torch and it came off like butter. but my advice would be to delete the egr. it cleans up the engine bay nicely

 

B

bboylobo

New Member

May 4, 2005

130

0

0

Lancaster PA

Apr 29, 2009

#4

• Apr 29, 2009

• #4

well dont i need the egr for something? i would need to patch that hole on the headers then lol.

 

J

jomull55

New Member

May 20, 2007

202

0

0

lucas, OH

Apr 29, 2009

#5

• Apr 29, 2009

• #5

bboylobo said:

well dont i need the egr for something? i would need to patch that hole on the headers then lol.

Click to expand...

im not sure how the car would run with a deleted egr with no tune. but i have mine deleted and it cleans up the engine bay and takes of about 2lbs lol.

its not a crucial part of your engine but you can plug the bung with a copper penny (real copper so like before 1981 i think) and i made a plate for on the plenum that plugs that up. many guys have done it just do a little research

 

S

SFC.Kill

New Member

Jan 26, 2009

55

0

0

Parker Ford, PA

Apr 30, 2009

#6

• Apr 30, 2009

• #6

You can buy a EGR delete kit.

 

squeak93

15 Year Member

Jun 2, 2005

2,331

408

164

Joplin, Missouri

May 1, 2009

#7

• May 1, 2009

• #7

Don't delete it w/o tuning. It will cause all sorts of issues..... If you don't have a tuner, then keep it on.... I personally don't like it either b/c it does clutter things up but there are no real benefits to deleting it.

 

bhuff30

Founding Member

Dec 11, 2001

6,037

35

129

Olathe KS

May 1, 2009

#8

• May 1, 2009

• #8

The EGR reduces emissions and actually improves fuel mileage, especially at light load conditions. It has no effect on wide open performance and generally doesn't break down or have problems. As said before, there is no advantage to getting rid of it. You are only making things more complicated because you'll have to get a tune of some sort so the computer isn't expecting it to be there and working.

 

Dr Jay

Member

Jan 1, 2004

134

0

16

Canada

May 1, 2009

#9

• May 1, 2009

• #9

This is a common trouble spot. I just went through the same issue when installing my headers. I believe it's a 21mm and I had to use a breaker bar and lots of heat to get it started. Mine broke loose at the fitting to manifold connection so I had to take the whole tube off and put it in the vice to get the fitting off. As if I wasn't having fun already when I finally got the fitting off, half the threads stayed in the nut on the end of the egr tube. After about 3 evenings of messing with it after work I have finally got the threads cleaned up. Dropping the k member went smoother than removing that egr tube. Good luck!