Hi Guys,
I am at the last stage and I cannot remember which line to connect were? So lets eliminate one. LOL Which fuel rail line is fed from the fuel pump?
Thanks for the help, I am hoping to have this 3 1/2 year project started on Saturday.
No seriously, I got the engine in pieces, and it is a brand new fuel system. Two lines come off the fuel rail with quick connects (OEM). Which one should I connect from the fuel pump?
everything before the regulator is feed (pressurized) everything after is return (little to no pressure)
so basically the regulator just holds fuel back until the pressure gets to a certain point then starts bleeding it into the return line, this way all the injectors have a constant pressure at the inlet
everything before the regulator is feed (pressurized) everything after is return (little to no pressure)
so basically the regulator just holds fuel back until the pressure gets to a certain point then starts bleeding it into the return line, this way all the injectors have a constant pressure at the inlet
Thank you for the help. I finally found a cutaway graphic of the OEM regulator, that let me determine where to connect in. Hopefully I can start this thing on Saturday.