• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fox Help with issue after driving >1hr and high RPMS

  • Thread starter Thread starter cuhud
  • Start date Start date May 2, 2022
C

cuhud

Member
Jan 15, 2020
11
2
13
burleson Tx
May 2, 2022
#1
  • May 2, 2022
  • #1
I've a 91Fox - Automatic/4.10 gears with a 306 Unknown Miles / Great shape from what I can tell - Edelbrock RPM heads - E-Cam - TFI - BBK CAI - 24lb Injectors with matching MAF - Stock Ignition - Stock fuel pump - Adjustable FPR - BAMA Tune ( I Know) - Tuned for 93 octane

I've own this car for 3 years, so anything else that may help just ask, I'm sure I'm missing something. I'm leaning towards something in the ignition area but before I start replacing stuff and testing everything I wanted to see if I can get some opinions.

So I have 2 issues -
#1. This has been going on since I've had the car but has become worse. After driving for over an hour or so it gets heat soaked and I can fell the loss of power and when its at idle, it sounds like its missing. During the first hour or so it runs strong and sounds great at idle. Doesn't randomly die or cut out and will start right back up if I shut it off. I'm positive it has the original distributor.

#2. This has just recently started within the last 6 months. At highway speeds over 70mph and around 3500rpms it sounds like its breaking up with loss of power. Doesn't buck or act like its going to die just like its running out of steam.

This is what I have done so far. New plugs and Wires - New rotor & Cap - Timing set at 12 - No codes I just pulled them - No CEL - No vacuum leaks / Smoked tested. TY and go easy I'm still learning my way around foxbody's
 

KRUISR

10 Year Member
Apr 16, 2015
1,816
925
143
May 5, 2022
#2
  • May 5, 2022
  • #2
Sounds like the TFI module to me. Especially because it starts having issues after it gets hot. Any corrosion around or behind the module on the distributor?
 
Last edited: May 5, 2022
Reactions: Potomus Pete

limp

wrap a little cheese around it and its a done
5 Year Member
Oct 4, 2020
5,466
2,899
173
Florida
May 6, 2022
#3
  • May 6, 2022
  • #3
410 gears at 70 MPH is your problem......
 
Reactions: General karthief

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,253
17,937
224
Massachusetts
May 6, 2022
#4
  • May 6, 2022
  • #4
Most likely TFI/PIP or Ignition coil related.

Sometimes the TFI/PIP generates a code, but typically not. They cause similar symptoms to what you have. It's becoming a more and more common issue as these cars get older and the replacement parts on the market are.....crap.
 
Last edited: May 6, 2022
Reactions: General karthief

CAMTWO1070

Active Member
Dec 17, 2021
240
81
38
NY
May 7, 2022
#5
  • May 7, 2022
  • #5
Seems like your injectors are too small and maxxed out on duty cycle so the engine starts to thermally heat up at the valves overheating them.....

What are you running for a fuel pump?

Everyone says going with 1 size larger injectors than is needed is bad,, It's not...It changes the duty cycle and the linear cycling of the injectors making it easier to tune in the engine for idle quality and start up plus always have the engine covered for fuel...

Do you have a Wideband 02 controller?..

I have a QH chip and on pin #27 on my ECU I have an AEM wideband 02 controller always keeping my tune in the sweetspot or throw a code to let me know theres an issue......

Back in 92 when we first hopped up a brand new one we swapped out the timing chain,1 up injectors,and dialed in the camshaft plus put a 340lph pump in the tank plus an adjustable fuel regulator then a set of 1.7 rocker arms and a custom tune...No exhaust or intake mods either and we were spanking brand new vettes all day long....LOL
 
You must log in or register to reply here.

Similar threads

Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
551
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
8
Foxbody high rpms and surging rpms
  • 86foxseth
  • Jun 9, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
198
Fox 5.0 Mustang Tech Jun 13, 2026
Noobz347
F
86 notch NEED HELP!!!!
  • foxbody86
  • Jul 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
82
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2026
Noobz347
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
260
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
W
  • Locked
Fox Wifes 1993 LX 5.0 dies after replacing ignition parts
  • Warhorse85
  • Aug 16, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
303
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?