Hooking up the stock starter.

88 Fox GT

Active Member

Nov 18, 2002

1,674

0

36

Iowa

Nov 29, 2004

#1

• Nov 29, 2004

• #1

I'm using the stock 1994 starter on my engine and need to verify if I have it hooked up correctly. It works alright as far as I can tell, just need some verification. Of course, it's grounded. I have a 12 ga. wire running from the "tab" on the starter to the REAR stud on the solenoid. I have the larger power wire running from the starter to the FRONT stud on the solenoid. This is correct, isn't it?

I need to know if it's correct, because I need to try to get my ignition switch hooked up soon. Thanks.

 

88 Fox GT

Active Member

Nov 18, 2002

1,674

0

36

Iowa

Nov 30, 2004

#2

• Nov 30, 2004

• #2

Anyone?

 

88 Fox GT

Active Member

Nov 18, 2002

1,674

0

36

Iowa

Dec 1, 2004

#3

• Dec 1, 2004

• #3

No one knows how to hook up a starter?

 

Killercanary

The car that set the bar.

Founding Member

Nov 29, 1999

5,676

1

76

Altoona, PA

Dec 1, 2004

#4

• Dec 1, 2004

• #4

I don't remember off the top of my head, but I plan to put my car up on blocks here soon and will look for you then, but it might be a while. I've only unhooked it when I replaced it, otherside I just unbolt it from the bell housing and let it sit so I don't mess with the wires.

 

88 Fox GT

Active Member

Nov 18, 2002

1,674

0

36

Iowa

Dec 1, 2004

#5

• Dec 1, 2004

• #5

Ok thanks.