I am trying to get the interior rear quarter panel off to run some cable. I have the back cushions out but do not see any fasteners for the bottom cushions.
Under the front of the cushion there is a push on clip on each side - you need to get under the cushion with a flatblade screwdriver and feel around. Once you're on it, put the blade in front of it and push it in - each side will pop up noticeably.
Under the front of the cushion there is a push on clip on each side - you need to get under the cushion with a flatblade screwdriver and feel around. Once you're on it, put the blade in front of it and push it in - each side will pop up noticeably.
Well it worked. I had the seat out in 30 seconds. Now that much of my interior is out just to run wiring, I start thinking about doing some custom upholstery or other interior customization. There is a fair amount of empty space under the seats as well. Got to get everything back together for the Fabulous Fords Forever show on the 18th. Oh well.
To remove the backseat, slip a flathead screwdriver between the seat and heel kick panel and press the release tab. Both sides need to be released before the seat will lift out.
Hop
ooops...see you get it done before I got the pic upload and inserted!!!