how do u put MSD 6a box on fox?

Thenemesis · May 18, 2005

Hi guys i got msd coil and wires on my car and i just found out you can put the boxes and stuff on these cars.. i just need to know how to wire it correctly.. or well wire it at all.. i have like evvverrryythhingg msd makes for ignition so if i need it to make it work i most likely have it so how do i?

Scorcher2005 · May 18, 2005

get the msd box along w/ the wiring harness (an extra $15) and it plugs right up. if you want to do it the hard way, dont get the harness and splice wires together according to the instructions.

slow93 · May 18, 2005

it is very easy with the harness and for 15 bucks i would rather pay than have to screw with splicing wires all day

N8Miller · May 18, 2005

yes, get the harness! it will save you time and a headache. on thing that you MIGHT need (as I did) is a tach adapter. mine didnt work after the install, so i had to add the adapter to make the factory one work.

Scorcher2005 · May 18, 2005

N8Miller said:
yes, get the harness! it will save you time and a headache. on thing that you MIGHT need (as I did) is a tach adapter. mine didnt work after the install, so i had to add the adapter to make the factory one work.

never heard bout the tach adaptor...

i was thinking bout doing a crane 6r ignition. Anyone heard any things bout this one? Also, do they make the harness for it as well?

Curse · May 18, 2005

N8Miller said:
yes, get the harness! it will save you time and a headache. on thing that you MIGHT need (as I did) is a tach adapter. mine didnt work after the install, so i had to add the adapter to make the factory one work.

Thats wierd, never heard of that problem. What box are you running?

Thenemesis, buy the harness makes things a lot easier as already explained. I am cheap and spliced everything together.

Shakerhood · May 18, 2005

I mounted mine on the frame rail under the battery and used the MSD harness. I was nice and close to a power source, many places to choose a grounding point and close to the coil to mount the harness.

jb89coupe · May 18, 2005

You don't need the harness, the kit comes with everything you need. You DON'T need to splice any wires, you just unplug the connector from the coil, plug two blade connectors into that, and two more onto the coil itself. NO SPLICING, just slip-on connections.

Scorcher2005 · May 21, 2005

does anyone know bout the crane 6r?

how do u put MSD 6a box on fox?

Thenemesis

Member

Scorcher2005

Member

slow93

New Member

N8Miller

I need NOS....make it 2 of the big ones

Scorcher2005

Member

Curse

Member

Shakerhood

jb89coupe

New Member

Scorcher2005

Member

Similar threads

how do u put MSD 6a box on fox?

Member

Member

New Member

I need NOS....make it 2 of the big ones

Member

Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency