302 .030 over, forged pistons, eagle rods, factory crank. x303 cam
edelbrock performer aluminum heads w/1.7 rockers on screw in studs
fully ported lower stock intake, 1 inch phenolic spacer, and comp cams plastic box upper
tremec 3550 with zoom clutch and pro 5.0
entire setup has @30K miles on it and has run a best of 14.0 very traction limited BUT trap speeds exceeding 106-108 so the horsepower is there but the launch skills werent with the driver
Anyway, I am going to list this either on here or Ebay and just wanted a round-about figure on what it is worth. Thanks guys
edelbrock performer aluminum heads w/1.7 rockers on screw in studs
fully ported lower stock intake, 1 inch phenolic spacer, and comp cams plastic box upper
tremec 3550 with zoom clutch and pro 5.0
entire setup has @30K miles on it and has run a best of 14.0 very traction limited BUT trap speeds exceeding 106-108 so the horsepower is there but the launch skills werent with the driver
Anyway, I am going to list this either on here or Ebay and just wanted a round-about figure on what it is worth. Thanks guys