I know the test on pushing down on the car at the points where the struts or shocks are. Or pulling up and releasing but I have Eibach Sportlines and the car barely damn moves when I try that.
I have 46,000 miles on my 2003 Mustang GT. Eibach Sportlines on since day one and still on stock struts or shocks.
I recently added a stereo system including sub woofer enclosure and amp so I weighed the rear end down just a tad more. So I started hearing a pop/bump sound from time to time in the rear. So I went ahead and ordered a Maximum Motorsport Pinion Snubber. Figured this could be that noise and its a cheap why not part for our cars if lowered.
But I'm not sure if that bump/pop sound from the rear is a busted shock. I just forked over a good amount of cash on 4 275/40/17 BFG KDW'2 that BFG finally came out with in that size and resurfaced rotors and 4 new brake bads and a froze caliper bracket. Fuel Filter, spark plugs and ordered a 160A Alternator because mine is lacking at idle. Removed the U/D Alternator pulley and put the stock one back on.
So as you can see I've dealt out a good amount of cash in the last 2 weeks. So Bilstein, Koni's, Tokico, Eibach is out of the question right now. But I can afford the KYB GR-2's if need be. Better than stock I know but not near as good as the big 4 named above.
Any tips to checking struts/shocks without pulling them out? Anybody think the popping is because I needed pinion snubber?
Sorry for the long post
Josh
I have 46,000 miles on my 2003 Mustang GT. Eibach Sportlines on since day one and still on stock struts or shocks.
I recently added a stereo system including sub woofer enclosure and amp so I weighed the rear end down just a tad more. So I started hearing a pop/bump sound from time to time in the rear. So I went ahead and ordered a Maximum Motorsport Pinion Snubber. Figured this could be that noise and its a cheap why not part for our cars if lowered.
But I'm not sure if that bump/pop sound from the rear is a busted shock. I just forked over a good amount of cash on 4 275/40/17 BFG KDW'2 that BFG finally came out with in that size and resurfaced rotors and 4 new brake bads and a froze caliper bracket. Fuel Filter, spark plugs and ordered a 160A Alternator because mine is lacking at idle. Removed the U/D Alternator pulley and put the stock one back on.
So as you can see I've dealt out a good amount of cash in the last 2 weeks. So Bilstein, Koni's, Tokico, Eibach is out of the question right now. But I can afford the KYB GR-2's if need be. Better than stock I know but not near as good as the big 4 named above.
Any tips to checking struts/shocks without pulling them out? Anybody think the popping is because I needed pinion snubber?
Sorry for the long post
Josh