Ok I NEED help bad. My 89 vert wasn't heating up with the stock mech fan. (It wouldn't go past the second line on stock temp gauge.)
I went to Mustangs Unlimited and purchased the procomp fan. It has 2 wires 1 black 1 red. I have a 30 amp relay and a new coolant neck so I can put in a temp sender. How the hell do you wire this? We tried for 4 hrs today and the fan would not turn on unless I wired it direct to the battery. Also should the fan be hooked up so it pulls air or blows it toward the front of the car?
Here is the relay the lines won't match up but hopefully someone will know what I mean.
_
l - l
l
top pin (87) black wire
left pin (86) orange wire
center pin (87a) red wire
right pin (85) yellow wire
bottom pin (30) red wire
Please help to wire, I might just go and spend the 260 bucks and get the black magic fan. I heard they are easy to install. Also I do have a/c and I do not have a low coolant sensor. Any ideas on how to hook this up
I went to Mustangs Unlimited and purchased the procomp fan. It has 2 wires 1 black 1 red. I have a 30 amp relay and a new coolant neck so I can put in a temp sender. How the hell do you wire this? We tried for 4 hrs today and the fan would not turn on unless I wired it direct to the battery. Also should the fan be hooked up so it pulls air or blows it toward the front of the car?
Here is the relay the lines won't match up but hopefully someone will know what I mean.
_
l - l
l
top pin (87) black wire
left pin (86) orange wire
center pin (87a) red wire
right pin (85) yellow wire
bottom pin (30) red wire
Please help to wire, I might just go and spend the 260 bucks and get the black magic fan. I heard they are easy to install. Also I do have a/c and I do not have a low coolant sensor. Any ideas on how to hook this up