• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

I Smell Fuel

  • Thread starter Thread starter a91what
  • Start date Start date Jun 4, 2012

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,733
6,716
214
Hillsborough county
Jun 4, 2012
#1
  • Jun 4, 2012
  • #1
Ok so after hunting down issues on my vert, i got it running like gold. Except for the backfire/pop when its cold. The car used to not idle at all when cold so just the pop is miles better.. I recently noticed that when i turn the key i smell raw fuel but i have no fuel line leaks i checked the injectors for leak down and they held pressure for an hour. so im wondering if my charcoal canister is maybe saturated, causing the fuel smell and maybe the missfire/pop. Thanx (my electric fans come on and i can smell it out the cowl of my hood.)
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 5, 2012
#2
  • Jun 5, 2012
  • #2
Charcoal canister plumbing - one 3/8" tube from the bottom of the upper manifold to the rubber hose. Rubber hose connects to one side of the canister solenoid valve. Other side of the solenoid valve connects to one side of the canister. The other side of the canister connects to a rubber hose that connects to a line that goes all the way back to the gas tank. There is an electrical connector coming from the passenger side injector harness near #1 injector that plugs into the canister solenoid valve. It's purpose is to vent the gas tank. The solenoid valve opens at cruse to provide some extra fuel. The canister is normally mounted on the passenger side frame rail near the smog pump pulley.



It does not weigh but a pound or so and helps richen up the cruse mixture. It draws no HP & keeps the car from smelling like gasoline in a closed garage. So with all these good things and no bad ones, why not hook it up & use it?


The purge valve solenoid connector is a dangling wire that is near the ECT sensor and oil filler on the passenger side rocker cover. The actual solenoid valve is down next to the carbon canister. There is about 12"-16" of wire that runs parallel to the canister vent hose that comes off the bottom side of the upper intake manifold. That hose connects one port of the solenoid valve; the other port connects to the carbon canister.

The purge valve solenoid should be available at your local auto parts store.

Purge valve solenoid:



The carbon canister is normally mounted on the passenger side frame rail near the smog pump pulley.
Carbon Canister:
 

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,733
6,716
214
Hillsborough county
Jun 5, 2012
#3
  • Jun 5, 2012
  • #3
Ok i understand what it is but that doesnt answer the question. Would i smell fuel if it went bad?
The hose running up to the intake is old and worn it looks cracked so ill replace it, ill check the soleniod. But if its saturated would i smell fuel when the key is on?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 6, 2012
#4
  • Jun 6, 2012
  • #4
a91what said:
Ok i understand what it is but that doesnt answer the question. Would i smell fuel if it went bad?
The hose running up to the intake is old and worn it looks cracked so ill replace it, ill check the soleniod. But if its saturated would i smell fuel when the key is on?
Click to expand...
Before you spend money on a new canister, take the old one out and turn it upside down and shake it. if anything that looks like carbon or fuel comes out, replace it. If not, then sit it out in the sun over the weekend and let it dry out.

You could still have fuel leak somewhere. The return line has pressurized fuel in it, so check it out too. Look for places that are unusally clean: gasoline is a great cleaning fluid...
 

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,733
6,716
214
Hillsborough county
Jun 6, 2012
#5
  • Jun 6, 2012
  • #5
Thanks i will try all that. Another question-- when i first start her up she idle's fine but if i just barely touch the gas the rpms drop like she's gonna die out.... I had this problem before and tried replacing everything that didnt give me a good reading, i recently replace the MAF but same issue i have not checked the harness and cant check for codes i cant find the STI connector i know where to look and what to look for but its just not there..... There is an extra wire in my diagnostic plug its red and white but not sure if its the right one... Thanks
 
You must log in or register to reply here.

Similar threads

D
Fuel 1985 GT Fuel Line Diagram
  • DienstXIV
  • Apr 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
2K
Fox 5.0 Mustang Tech Jul 12, 2025
DienstXIV
D
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
669
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
S
thread no longer needed
  • skidad
  • Oct 17, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
128
1996 - 2004 SN95 Mustang -General/Talk- Oct 17, 2026
skidad
S
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
228
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?