i did some wire hiding this last weekend and when i tried to crank the car it just kept cranking and wouldnt stop so i had to disconnect the battery to make it stop. Now the fuel pump wont prime and the car wont even crank. im not even getting power to my starter relay from my ign switch. i tested the 2 yellow wires on the ign switch and those arent getting power either.
i bench tested my starter relay also and it was fried. my headlights/doorlocks and interior lights do work though. Im afraid that i may have hooked power to both the power and ground side of the 6al box
how do i test that my ecu is working?
how do i test that my 6al box works, i have power to it but no power on the ground side.
thanks for any help,
Drew
i bench tested my starter relay also and it was fried. my headlights/doorlocks and interior lights do work though. Im afraid that i may have hooked power to both the power and ground side of the 6al box
how do i test that my ecu is working?
how do i test that my 6al box works, i have power to it but no power on the ground side.
thanks for any help,
Drew