growler New Member Dec 8, 2004 39 0 0 Reading,Pa Jul 15, 2007 #1 Jul 15, 2007 #1 I did a HCI swap and now I have idle issues. I can start the car up and it idle's half decent, but once I drive it 2 blocks from my house the idle will not drop below 2100 rpm. I set the tps at .98
I did a HCI swap and now I have idle issues. I can start the car up and it idle's half decent, but once I drive it 2 blocks from my house the idle will not drop below 2100 rpm. I set the tps at .98
HISSIN50 "How long does it take to get help in here? 15 Year Member Nov 29, 1999 31,179 34 129 Jul 15, 2007 #2 Jul 15, 2007 #2 Pull codes. Also, when it acts up, try unplugging the IAC electrical connector. See if it falls back to a normal idle. If not: Wait for it to idle high. if you turn the car off and back on, does the issue go away for a little bit? Good luck.
Pull codes. Also, when it acts up, try unplugging the IAC electrical connector. See if it falls back to a normal idle. If not: Wait for it to idle high. if you turn the car off and back on, does the issue go away for a little bit? Good luck.
growler New Member Dec 8, 2004 39 0 0 Reading,Pa Jul 15, 2007 #3 Jul 15, 2007 #3 I unplugged the iac and nothing changes, but if I shut it off for a couple minutes it will idle half way decent
I unplugged the iac and nothing changes, but if I shut it off for a couple minutes it will idle half way decent