idle ?

shttygtstang

New Member

Jun 2, 2004

978

0

0

Oct 5, 2004

#1

• Oct 5, 2004

• #1

ok im putting my motor back together so i decided to start it and idle jumped up to 5000 right away now i dont have my egr on the spacer or ne sensors like my iac ect hooked up nor non of my vacume lines.would this cause my idle to jump up like that or should i look else where .before i took it apart it was fine

 

shttygtstang

New Member

Jun 2, 2004

978

0

0

Oct 5, 2004

#2

• Oct 5, 2004

• #2

ne1

 

Blandnuts

I don't swallow; I only swoosh

Founding Member

Aug 21, 2000

1,172

124

124

FloorDuh

Oct 5, 2004

#3

• Oct 5, 2004

• #3

Question, why are you running the motor with nothing on?

 

shttygtstang

New Member

Jun 2, 2004

978

0

0

Oct 5, 2004

#4

• Oct 5, 2004

• #4

to see if it was all going together right .......


can ya help me.i thought with the car would not idle at all but i was wrong .i dont wana put all this back together to tear it apart again

 

Blandnuts

I don't swallow; I only swoosh

Founding Member

Aug 21, 2000

1,172

124

124

FloorDuh

Oct 5, 2004

#5

• Oct 5, 2004

• #5

Well, not having all the sensors and vacuum lines and whatever else you don't have on is your problem. If the car was running, I don't see it having a mechanical problem. Was that what you wanted to hear?

 

R

Racerjoey1

Founding Member

Oct 21, 2002

76

0

7

Birmingham, AL

Oct 5, 2004

#6

• Oct 5, 2004

• #6

Hey man hook everything back up before you start it. Without vacuum lines the engine can suck more air. Also it needs the sensors to control the idle and mixture. See how it runs put all together.

Joey

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Oct 5, 2004

#7

• Oct 5, 2004

• #7

sounds like you have the ultimate vac leak (amongst other issues with no ancillary components being hooked up). that would cause a very high idle.

good luck with getting it all together.