• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

idle ?????

  • Thread starter Thread starter jimsstang91
  • Start date Start date Jan 21, 2006

jimsstang91

New Member
Dec 4, 2005
101
0
0
Jan 21, 2006
#1
  • Jan 21, 2006
  • #1
i readjusted my idle on my 91 it was way off. so it idled great in my garage it's off the road for the winter. so i took it for a ride and when i got home it wouldn't not idle it would surge do i have a bad tps, or iac.???????? i adjusted the tps and iac.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jan 21, 2006
#2
  • Jan 21, 2006
  • #2
did you do all steps 1-5 in link below and you said its offroad for the winter how old is gas in tank and did you add a stabilizer that removes moisture in tank before storing or driving. theres ways to test all the sensors to see if there defective owning a good repair manual or jrichker can give you steps to test sensors.and sometimes clearing computer (removing neg. from battery for 30 mins) after resetting and cleaning sensors to allow computer to relearn will help.

http://www.muscularmustangs.com/maintain.php
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 21, 2006
#3
  • Jan 21, 2006
  • #3
See the sticky "Help me create the Surging Idle Checklist" at the top of the forum for help with your idle problems. The first post in the sticky has almost all the details you need.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 21, 2006
#4
  • Jan 21, 2006
  • #4
Do you have a 94-95? Otherwise you can't adjust the IAC.

Was the motor completely up to operating temp when you adjusted the idle? Was the IAC unplugged? Was the KAM cleared?

Any of these things can contribute to an issue, as well as many others.

Good luck.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jan 21, 2006
#5
  • Jan 21, 2006
  • #5
the IAC can only be cleaned or tested by testing resistance between terminals which should be 7-13 ohms
 
You must log in or register to reply here.

Similar threads

7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
855
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
J
Engine Stalling
  • josh40tay
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
200
Fox 5.0 Mustang Tech Oct 21, 2026
JD1964
8
Foxbody high rpms and surging rpms
  • 86foxseth
  • Jun 9, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
356
Fox 5.0 Mustang Tech Jun 13, 2026
Noobz347
L
Engine 85 GT Excessive Idle
  • lutzkecj
  • Sep 18, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
373
Fox 5.0 Mustang Tech Sep 21, 2026
86HO5.0
8
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?