idling issues

justinmurray2001

Member

Jan 25, 2020

11

2

13

edmond OK

Jan 26, 2020

#1

• Jan 26, 2020

• #1

just bought me first mustang. its a 2001 ford mustang gt. whenever i give it gas and then stop abruptly the rpms will dip below normal idle and the car will shake and shudder for a couple seconds before going back up to the normal idle. ive replaced the idle control valve and it did nothing. i dont know if its going to get so bad my car will just die. whats going on?

 

General karthief

wonder how much it would cost to ship you a pair

Mod Dude

Aug 25, 2016

27,826

10,507

203

polk county florida

Jan 26, 2020

#2

• Jan 26, 2020

• #2

Moved this so you can get some responses.
have the car scanned, and not at a parts store.
i would advise you, if it has a lot of miles, to get the plugs, fuel and air filter changed.
Oh, and welcome to stangnet

 

Reactions: justinmurray2001

justinmurray2001

Member

Jan 25, 2020

11

2

13

edmond OK

Jan 26, 2020

#3

• Jan 26, 2020

• #3

whenever you say scan do you mean use a OBDII reader? because there is no check engine light on. i recently replaced the spark plugs and gave it an oil change

 

Potomus Pete

I'm still waiting for the fully nude shots

5 Year Member

Mar 7, 2019

3,308

1,223

153

Sarasota Florida

Jan 26, 2020

#4

• Jan 26, 2020

• #4

Just a guess because I just did mine. I followed the idle adjustment guide on Stangnet. Mine was running a little rough at the finish of acceleration. Probably was 500 rpm at idle.I bumped it up to 750-800 and its much better in all aspects of low rpm driving. I have a five speed so lots of ups and downs. You have to set it a certain way thats explained here on the idle adjust post. Worth a try. I would also put in a can of Gumout.

 

justinmurray2001

Member

Jan 25, 2020

11

2

13

edmond OK

Jan 26, 2020

#5

• Jan 26, 2020

• #5

mine idles at 500 RPM. it is cammed though. should i adjust my idle? and how do you adjust it

 

General karthief

wonder how much it would cost to ship you a pair

Mod Dude

Aug 25, 2016

27,826

10,507

203

polk county florida

Jan 26, 2020

#6

• Jan 26, 2020

• #6

Go through the tech threads, may be an explanation here

4.6 Tech Important Threads (NEWBIES, HERE FIRST)

OK peeps. We're getting way too many stickies. So I'm consolidating them into one thread. I will leave this locked so that only mods will be able to add to them. If you see a thread as being genuinely informative, PM me and I'll consider adding it. General Infomation 1996 through 2004...

www.stangnet.com

 

justinmurray2001

Member

Jan 25, 2020

11

2

13

edmond OK

Jan 26, 2020

#7

• Jan 26, 2020

• #7

UPDATE. i found out the idling issue was because the throttle was set too low. i adjusted the idle rpm on the throttle body and it is fixed. thanks for the advice and help guys

 

Reactions: Potomus Pete