Ignition Systems!!

The Stang GT · Dec 30, 2005

How in the world do u change the spark plugs and spark plug wires on a 2000 4.6 liter GT?? I do not see how, with aftermarket wires from Ford Racing!! Need help, thanks!!

timeless2 · Dec 30, 2005

http://bullittarchive.com/1017.htm

03ghoststang · Dec 30, 2005

they dont have spark wires they have C.O.P (coil on plug) and that write up is how it's done to swap spark plugs

The Stang GT · Dec 30, 2005

Hey

thanks a lot guys

The Stang GT · Dec 30, 2005

Are there any upgraded COP's(coil on plug) That can be purchased???

thomas91169 · Dec 31, 2005

a COP setup is pretty stout as they come, unless youre getting ignition problems due to boost blowing spark out or need a stronger spark for lots of nitrous(like way more than your stock bottom end will ever take).

CanadaStang · Dec 31, 2005

thomas91169 said:
a COP setup is pretty stout as they come, unless youre getting ignition problems due to boost blowing spark out or need a stronger spark for lots of nitrous(like way more than your stock bottom end will ever take).

They are rather pricey too!

Kilgore Trout · Dec 31, 2005

You can get upgraded spring connectors for $99, the connector that goes from the coil to the spark plug.

http://www.jcwhitney.com/autoparts/...0398481/Pr-p_CATENTRY_ID:10000032247210398481

03ghoststang · Dec 31, 2005

or you can try getting the boost a spark form kenne bell

The Stang GT · Dec 31, 2005

Thanks Again guys!!!

Dark Knight GT · Dec 31, 2005

Kilgore Trout said:
You can get upgraded spring connectors for $99, the connector that goes from the coil to the spark plug.

http://www.jcwhitney.com/autoparts/...0398481/Pr-p_CATENTRY_ID:10000032247210398481

Kilgore, are those any better than stock ? Also, are these things similar or at all like the COP connectors that is offered by Granatelli motorsports ? I have the Plasma booster now, and I'm going to install it. I know you should solder the connections for best results, so I'll do that. I'm just wondering if I can upgrade with anything else that will work.

BTW, what is this "boost a spark" from KB ?

03ghoststang · Dec 31, 2005

Dark Knight GT said:
Kilgore, are those any better than stock ? Also, are these things similar or at all like the COP connectors that is offered by Granatelli motorsports ? I have the Plasma booster now, and I'm going to install it. I know you should solder the connections for best results, so I'll do that. I'm just wondering if I can upgrade with anything else that will work.

BTW, what is this "boost a spark" from KB ?

here is a link to it

http://www.kennebell.net/accessories/boostaspark/boostaspark.htm

damacman · Dec 31, 2005

Dark Knight GT said:
Kilgore, are those any better than stock ? Also, are these things similar or at all like the COP connectors that is offered by Granatelli motorsports ? I have the Plasma booster now, and I'm going to install it. I know you should solder the connections for best results, so I'll do that. I'm just wondering if I can upgrade with anything else that will work.

BTW, what is this "boost a spark" from KB ?

Bro, you still haven't put that thing on yet? It's 9 wires . . . !

Dark Knight GT · Dec 31, 2005

damacman said:
Bro, you still haven't put that thing on yet? It's 9 wires . . . !

Yeah, but I suck at wiring, and I'm too afraid to try and solder the connections myself. I was going to have it installed with a list of other parts by a mechanic I know. He would probably be better at it than me.

Dark Knight GT · Dec 31, 2005

03ghoststang said:
here is a link to it

http://www.kennebell.net/accessories/boostaspark/boostaspark.htm

I wonder if that would help out at WOT on a n/a motor or not ? How much is that thing anyways ?

Dark Knight GT · Feb 16, 2006

Bump.

SilverBullet00 · Feb 16, 2006

I know ACCEL is in the process of releasing an aftermarket COP setup for our cars. I really wish I knew more about it because im in the market for some myself.

Dark Knight GT · Feb 16, 2006

SilverBullet00 said:
I know ACCEL is in the process of releasing an aftermarket COP setup for our cars. I really wish I knew more about it because im in the market for some myself.

Yeah, I saw those Accel COP things mentioned at RPMoutlet. I'm hoping they'll come out soon, and for a decent price. I know Granatelli has released a full kit, but there's no proven results with them just yet. I heard White99GT(Bill) over at MD say that this weekend some guys with blown setups are getting dyno test results for the Granatelli COP system. Hopefully, we'll get more feedback soon.

hognutz · Feb 16, 2006

$425. not sure if it is worth it or not. they say they are good for 8hp minimum. I don't know if that is just 8hp peak though and not much lower in the band. dyno numbers can be confusing. could be kind of like shortie headers give you power on the dyno but not much et wise.

there is a group purchase over at MD

Dark Knight GT · Feb 17, 2006

Thanks Hognutz. I'm aware of the Group purchase going on over at MD. If anyone else has anything to share, please do. This is a good thread.

Ignition Systems!!

New Member

Vi Veri Veni Versum Vicus Vici

Well-Known Member

New Member

New Member

I'd donkey punch my sister.

New Member

Fried or Broiled ?

Well-Known Member

New Member

I can't get it up......ok that didn't sound right.

Well-Known Member

Member

I can't get it up......ok that didn't sound right.

I can't get it up......ok that didn't sound right.

I can't get it up......ok that didn't sound right.

New Member

I can't get it up......ok that didn't sound right.

New Member

I can't get it up......ok that didn't sound right.

Similar threads

Privacy & Transparency

Privacy & Transparency