• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

I'm going to have $3,000 to spend soon...

  • Thread starter Thread starter KingDiamond
  • Start date Start date Feb 15, 2004

KingDiamond

New Member
Mar 9, 2003
637
0
0
42
Chicago, IL
Feb 15, 2004
#1
  • Feb 15, 2004
  • #1
... so what should I do to my mustang? I want to make it faster obviously, but without sacrificing streetability. I want to get into the mid-low 13's. What I'm definately going to do before anything else though:

-Edge Racing 3400 9.5" Stall Converter (going to be finished by the end of this month) $600

-Rebuild rear-end and replace axle seals $400

-Bullitt suspension $400

-Caster camber plates $150

-Aluminum radiator (don't know what brand yet)

-Tweecer R/T $550

With those mods and the ones I currently have I hope to be in the low 14's.

After that stuff I should have about $1k left. What else should I get?
 
S

stangin it

Founding Member
Sep 25, 2002
554
0
0
42
Long Island, NY
Feb 16, 2004
#2
  • Feb 16, 2004
  • #2
If your radiator isnt broken then dont get a new one. Get a set of heads, Cam and intake it will give you a good gain
. Edelbrock performers- $1100 (you can get them cheapers from summit if they have a discount code)
Comp cam- $250
Edelbrock intake- roughly $500
Roller rockers- $200
Then you need gaskets and all kinds of little stuff. A set of injectors and a MAF would be good also but you can run the stock injectors for a while if you have too. Also Drag radials are a really good mod.
 

OinkAodeOink

Founding Member
Jun 5, 2002
3,026
1
0
44
Daytona bch, Florida
www.turbochargedinnovation.com
Feb 16, 2004
#3
  • Feb 16, 2004
  • #3
if the rear end needs a rebuild, by all means do that. Its always a good idea to do the suspension, and get that over with. Have the car handling better then new, makes driving fun.

Ide lay off the radiator unless your stock one is bad, and also the Tweecer.
I would spend the money on a set of heads and an intake, if you want to make the car faster. Heads and intake are the most resrictive parts on the 5.0's, so replace them first, to make a diference.

If money allows go for everything mentioned

By the way, the Performers are only $995 new at www.poweredbyford.com
Cobra intake is only 500, and already has the $85 elbow built in.(saves $85)
 

Big Jay

New Member
Aug 4, 2003
130
0
0
50
Tucson, Az.
Feb 16, 2004
#4
  • Feb 16, 2004
  • #4
I ran this combo for a while and had good luck.
Stock short block, TW Heads w/ 1.72 rockers, GT-40 intake with port matched lower, 70mm TB, 75mmMAF w/CAI, headers, x-pipe, cat-back, 3.73 gears and a set of slicks.
Stock fuel w/regulator
Stock radiator

The trick to making the cooling system work is to stay away from pulleys. With pulleys the water pump and alt. slow down. This drops the voltage at idle and in turn slows the cooling fan. I live in the Desert where it is HOOOOOTTTTT in the summer. I still have the stock cooling system with a 180 thermostat.

I ran 13.5s all day long with this combo. I used to bracket race in the summer and I had access to a weather station every run. It was not unusuall to see the corrected elevation above 7000 feet in the summer at night races. I never ran less than 102mph in the bad air and the best I ran was 105.
 

KingDiamond

New Member
Mar 9, 2003
637
0
0
42
Chicago, IL
Feb 16, 2004
#5
  • Feb 16, 2004
  • #5
My radiator is leaking tranny fluid on the top line, I have no idea why this is happening and it's leaking inbetween the plastic and the brass so I don't know how to fix it.

Also I think I need the tweecer to solve my shifting problems with the 4.10 gears.
 

KingDiamond

New Member
Mar 9, 2003
637
0
0
42
Chicago, IL
Feb 16, 2004
#6
  • Feb 16, 2004
  • #6
With Edelbrock heads and a Trickflow street intake, how much power would I make with a custom cam over the stock one?
 

stangboy

Founding Member
Aug 31, 1999
3,932
469
194
49
New Orleans, LA
stangboy77.stangnet.com
Feb 16, 2004
#7
  • Feb 16, 2004
  • #7
If you wanna go noticeably faster, get heads, cam, and intake. The stall would help too. As a matter of fact I still have the Level 10 valvebody with shift kit from my last AODE Its still in perfect condition. I'll sell it to you for $150 if you want it. Let me know.
 

Joes95GT

New Member
Jan 23, 2003
3,132
1
0
Delaware
Feb 16, 2004
#8
  • Feb 16, 2004
  • #8
My Performers are coming from Powered by Ford. They have been on a national back-order since the middle of January and the guys at Powered by Ford said I would have mine sometime between the end of February and the middle of March. If your a waiting kind of guy, then that's great, but if your not - call Scummit. They are great guys to deal with over at PBF, they gave me free shipping on the Performers because they thought that they have a few more sets laying around to ship me. They ended up not having them, and because of the wait, I'm getting free shipping out of it. $995 in and out, can't beat it.

Joe
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
908
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
362
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
173
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
M
4.6 2v ready to go in.
  • Michael007
  • Apr 22, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Apr 23, 2024
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?