Inertia Switch Connector

sicknotch93

New Member
Sep 12, 2008
4
0
0
Does anyone have any pictures of the inertia switch connector?

I bought a new switch and connector from the dealer beacuse the dingbat I bought the car from decided to bypass it. There are two wires bypassed but the switch has 3 terminals just like the harness has.

Any help will be appreciated.

Thanks
 
You only use two of the terminals. At the bottom of the switch molded into the case surrounding the terminals you should see the letters NO C NC. You need to use the C (Common) and NC (Normally Closed) terminals. In this configuration with the button pushed down the switch would be closed and when it pops up the switch would open.