info about changing shifter?

95WhiteVenom

Founding Member

Oct 27, 2002

624

0

16

Alabama

Nov 14, 2004

#1

• Nov 14, 2004

• #1

Well guys getting a used tri-ax thursday. I can follow direction about how to put it in (prolly easy enought to figure out without the directions, but i have never done it before. I just want to know about the gear lube. Suggestion of what kind to use Synchormesh stuff or what? Also what about getting the old lube out like what all do I need to do? I'm clueless....
also info about adjusting the shifter stobs in it.

 

R

Rrich

New Member

Oct 19, 2004

184

0

0

Nov 14, 2004

#2

• Nov 14, 2004

• #2

ill get u a step by step link for installing a tri ax.

 

R

Rrich

New Member

Oct 19, 2004

184

0

0

Nov 14, 2004

#3

• Nov 14, 2004

• #3

Rrich said:

ill get u a step by step link for installing a tri ax.

Click to expand...

EDIT* here it is. http://www.tradboy.com/gallery/steedashifter if you change the fluid make sure you dont over tighten the drain plug. found that out the hard way. good luck and it is a VERY easy install.

 

H

HazMat404

Founding Member

May 24, 2002

1,749

0

36

Nov 14, 2004

#4

• Nov 14, 2004

• #4

yup, i can take one out and put one in within an hour now. first time probably took about 2 or so. just make sure you dont break the plastic clips on the shifter bezel

 

95WhiteVenom

Founding Member

Oct 27, 2002

624

0

16

Alabama

Nov 15, 2004

#5

• Nov 15, 2004

• #5

well HazMat404 i have taken that shifter bezel off a bunch had to hook my cigarette lighter thing back up it was unplugged so i couldn't charge my cell phone.

Rrich thanks for all the info guys. Dude is being lazy and I have to wait till like this weekend to get my shifter. Ill post again after i get it in along with my new shifter handle I have to wait till next week to order cause it hasnt been released yet.

 

95WhiteVenom

Founding Member

Oct 27, 2002

624

0

16

Alabama

Nov 15, 2004

#6

• Nov 15, 2004

• #6

What about the gasket how do it get a new one and what about $$$

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Nov 16, 2004

#7

• Nov 16, 2004

• #7

95WhiteVenom said:

What about the gasket how do it get a new one and what about $$$

Click to expand...

There is no gasket in a shifter replacement...RTV is used in its place...Clean the old, and lay new bead down then install the cover and bolt it up...