• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Injector Leak...

  • Thread starter Thread starter Strype
  • Start date Start date May 25, 2006

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
May 25, 2006
#1
  • May 25, 2006
  • #1
Hey guys I just did an intake swap and went to prime the injectors... they leaked, and from the looks of it it's most of them. It looks as if they're leaking from the bottom.

If I put the railing on tighter and change the o-rings will that fix my problem? I'm wanting to sell this car soon. Also I have to have it running by tomorrow or Saturday

Thanks!!!
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
May 25, 2006
#2
  • May 25, 2006
  • #2
TTT in hopes of tomorrow- God Bless the 9 who looked and thought
 

88gt

Founding Member
Aug 2, 1999
794
0
0
Drillers cabin
May 25, 2006
#3
  • May 25, 2006
  • #3
It's fairly cheap and easy to change the o-rings...

Did you make sure to "lube" them prior to installation?

I'd give it a try...
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 26, 2006
#4
  • May 26, 2006
  • #4
Fuel injector seal kits with 2 O rings and a pintle cap (Borg-Warner P/N 274081) are available at Pep Boys auto parts. Cost is about $2.74 per kit.. The following are listed at the Borg-Warner site ( http://www.borg-warner.com ) as being resellers of Borg-Warner parts:

http://www.partsplus.com/ or http://www.autovalue.com/ or http://www.pepboys.com/ or http://www.federatedautoparts.com/

Most of the links above have store locators for find a store in your area.

Use motor oil on the O rings when you re-assemble them & everything will slide into place. The gasoline will wash away any excess oil that gets in the wrong places and it will burn up in the combustion chamber.

The pintle caps fit either injectors with a pin sticking out the injector end or 4 with more tiny holes in the injector end
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
May 26, 2006
#5
  • May 26, 2006
  • #5
Strype they have little cheap ass rebuild kits that contain the orings that you need for the back end. I wonder though if your leaking from multiple injectors if you didn't have the rail pushed down far enough and or then tightened the retaining bolts enough to keep the rail from pushing off the injectors and leaking.
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
May 26, 2006
#6
  • May 26, 2006
  • #6
Thanks guys... I'm thinking they aren't pushed down enough. I didn't put motor oil on them so I'll buy a rebuild kit and sit on the fuel rail while someone tightens it and see if that works
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
May 26, 2006
#7
  • May 26, 2006
  • #7
before that try to put a little more pressure doen on the fuel rail and tighten, mine did this as well. it's because you could use enw o-rings im sure. i had this same problem, but with just bolting it down with a little more pressure everything been fine for a year now.

if it's just most of them all of a sudden it seems like they aren't seated properly...
 
You must log in or register to reply here.

Similar threads

S
4.6 spitting o-rings out of 2 injectors
  • skidad
  • Sep 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
78
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
skidad
S
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
522
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
238
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
P
Engine Mysterious coolant leak at back of engine
  • palerider94
  • Jan 18, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
281
Fox 5.0 Mustang Tech Jan 19, 2026
AeroCoupe
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
737
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?