• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Electrical Inner Tail Lights And License Plate Light Problem

  • Thread starter Thread starter Josh683
  • Start date Start date Oct 24, 2013
J

Josh683

New Member
Oct 24, 2013
2
0
2
Oct 24, 2013
#1
  • Oct 24, 2013
  • #1
Hi all,
I was hoping someone would help me out with an issue I'm having. I recently switched out my tail light bulbs to LED bulbs along with an LED bulb for my license plate light. I was testing them out when all of a sudden the inner taillights and the license plate light went out at the exact same time. I checked the bulbs and they are still working because the inner taillight bulbs all light up when I hit the brakes and the license plate bulb was tested in another socket. I did some research online and I think it may be some wiring from the sjb (smart junction box) since there is a cluster of wires that connect to those three lights in particular. I've included a before and after picture link so you can see the difference. Also, my car wouldn't crank this morning and I think I'm having a "battery drain" issue. All I heard was a clicking noise when trying to start it. I jump started it with another vehicle and it started up but I'm concerned because I've never had that problem before. If anyone has any advice please let me know. I'd like to try and fix this problem without having to go to the dealership. Thank you!!!

http://i565.photobucket.com/albums/s...683/photo1.jpg (Before)

http://i565.photobucket.com/albums/s...683/photo2.jpg (After)
 

05 black GT on 94

Member
Sep 21, 2013
11
1
14
Oct 24, 2013
#2
  • Oct 24, 2013
  • #2
Hi josh 683. Have you check fuse no=59 (30) amps no=63 (30) amps no=67 (30) amps in the fuse box under the hood. You mite of pinch a wire putting your rear lamp assembly back on double check what you did.
 

timjimmy

Active Member
Jul 7, 2013
215
12
29
Clarksville, TN
Nov 7, 2013
#3
  • Nov 7, 2013
  • #3
In the past, on other vehicles, I've run into a similar issue with improperly operating lights. I swapped turn signals bulbs for LEDs and they would function sporadically or not at all. Turns out that they required a different resistance than ordinary bulbs which necessitated installing resistors in the wiring harness. Try checking with the manufacturer to ensure they have the same electrical demand as your old bulbs.
 
You must log in or register to reply here.

Similar threads

E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
371
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
253
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
2
Resolved Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
498
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2026
2000ElectricGreen
2
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
750
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
186
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?