• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

installing BBK longtubes

  • Thread starter Thread starter 90LX5spd
  • Start date Start date Jun 21, 2006
9

90LX5spd

New Member
Aug 13, 2005
53
0
0
PA
Jun 21, 2006
#1
  • Jun 21, 2006
  • #1
I've finally decided to go with BBK longtubes on my '90 5spd. Are there any installment issues to watch out for? Will the stock starter still fit? I do have a heat blanket for it. Do the O2 sensor wires fit? Does anything radical need done to get 'em in there, like unbolting the motor? How about the steering shaft? Thanks for any input.
 
D

DABEAN212

New Member
May 8, 2003
10
0
0
Georgia
Jun 21, 2006
#2
  • Jun 21, 2006
  • #2
I have BBK 1 5/8" longtubes on my 90 and they are/can be a bit tricky to install but nothing too hard. With mine, I did have to install the drivers side from the bottom and the passenger side from the top. The stock starter will fit fine, just have to take it out first to install then replace when done. THe O2 sensors will need extensions and you can pick those up from Summit or Jegs fairly cheap. The steering shaft is fine, I did not have to remove mine at all. All in all, I've pulled mine and re-installed them about ten times. (New motor, gaskets, ceramic coating, etc.) I would HIGHLY recommend you purchase the ceramic coated ones rather then the chrome ones. Doesnt take long for the chrome to turn many different colors. Good luck...the sound is awesome!
 
D

dwhiskie

New Member
Sep 18, 2004
183
0
0
Jun 21, 2006
#3
  • Jun 21, 2006
  • #3
Would be a good idea to put a mini starter in. The stock starters wont last long with L/T and then trying to get it out when it goes bad is a pita.
 
You must log in or register to reply here.

Similar threads

I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
186
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
A
P0036 P0056 P0137 P0157 2020 Ford Mustang GT
  • AmkoA
  • Jun 16, 2026
  • 2024+ (S650) Mustang -General/Talk
Replies
0
Views
291
2024+ (S650) Mustang -General/Talk Jun 16, 2026
AmkoA
A
J
Engine 4.6 Running rough at half throttle
  • jake411
  • Aug 3, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
321
SN95 4.6L Mustang Tech Oct 20, 2026
DangStitches
D
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
496
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Exhaust 1 3/4” Long Tubes on a Fox Body AOD – Easiest route?
  • 5.0 Mike
  • Mar 19, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Mar 21, 2025
5.0 Mike
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?