Also, I ditched the isolators when I did it. It gave me another 1/2-3/4" drop, but really didnt change much else. People will say that it "make the suspension louder" but if you have caster/camber plates (which you should if you are lowering much) there is not added noise. I just wrapped several wraps of black electrical tape around the top and bottom.
This was mine a couple years ago (damn, this was really 5 years ago!) with the Eibach Pro Kit and no isolators. I just thought it was still a little too high with the isolators. I thought it was about perfect with them removed. Also, remember that the springs will settle, so it will get a little lower a month or so after the install.
Also, I ditched the isolators when I did it. It gave me another 1/2-3/4" drop, but really didnt change much else. People will say that it "make the suspension louder" but if you have caster/camber plates (which you should if you are lowering much) there is not added noise. I just wrapped several wraps of black electrical tape around the top and bottom.
This was mine a couple years ago (damn, this was really 5 years ago!) with the Eibach Pro Kit and no isolators. I just thought it was still a little too high with the isolators. I thought it was about perfect with them removed. Also, remember that the springs will settle, so it will get a little lower a month or so after the install.
@trueblue I'll post that before and after pic within a day or two because I have before pic but not the after just yet I want to post both at one time.