• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Irritating Squeak

  • Thread starter Thread starter 1997GTJF
  • Start date Start date Jan 24, 2009
1

1997GTJF

New Member
Jan 24, 2009
10
0
1
Jan 24, 2009
#1
  • Jan 24, 2009
  • #1
Hi everyone, first time posting here, just got a small problem I need help with, I bought myself a 97 Mustang GT today, but i've noticed when doing higher speeds, say on a motorway, there is an annoying squeaking noise appears, it's not there at low speeds around town etc, at first I thought it was around the dash area inside the car, but the guy I got it from said that it's in fact coming from the cowl vent grille on the outside as he noticed it did the noise once when he was cleaning it, i've had a poke around and I can't really get it to do the noise or isolate where it's coming from, i'm assuming it is the driver's side but not 100%, the panel itself is not exactly that tight, it's a little flimsy when you press it etc, anyone heard of this problem before and any ideas on a solution? I was going to take the panel off and refit it in the hope it may cure it but i'm not sure how it comes off? Any ideas? This is the panel i'm on about, the black bit, are there any diagrams or instructions anywhere on how it comes off because I don't want to crack it? Or is there anything I can do without having to take it off? I've got a 71 Mustang too so i'm use to squeaks and rattles but i'd like to get this one sorted seeing as it's a fairly new car, Thanks for any help

View attachment 275501

View attachment 275503
 
G

GettinThere

Member
Jul 29, 2005
553
1
19
Central Texas
Jan 24, 2009
#2
  • Jan 24, 2009
  • #2
1997GTJF said:
...but i'm not sure how it comes off? Any ideas? This is the panel i'm on about, the black bit, are there any diagrams or instructions anywhere on how it comes off because I don't want to crack it?
Click to expand...

A Haynes manual should have info to help you there, as well as a lot of other info that is useful. About $16 at most auto parts stores. Good luck.
 
J

JimC

Member
Dec 1, 2002
170
0
17
Duluth GA
Jan 25, 2009
#3
  • Jan 25, 2009
  • #3
I had the same issue and it took me months to find the cowl squeak. Open the hood 90 degrees and there is weather stripping where the cowl and the firewall meet. Pull the weather stripping straight up, it slides right off. You should see 3 screws securing the cowl. Mine where all missing which was causing the squeak. Replace the screws and your done. No more squeak.
 

VOORHEES

Stangnet's "35th Limited Edition" VIN Guy
15 Year Member
Nov 9, 1999
3,046
36
119
LaGrange, GA
Jan 26, 2009
#4
  • Jan 26, 2009
  • #4
Thats where its at, I had that sqeak on both SN-95 GT's I've had. The clips that hold the cowl vent down are the culprit. I put some electrical tape on the clips before I pushed them back in the holes. Problem solved.
 

squeak93

15 Year Member
Jun 2, 2005
2,348
417
164
Joplin, Missouri
Jan 26, 2009
#5
  • Jan 26, 2009
  • #5
Irritating Squeak:


Sorry, I will try to be less irritating in the future...
 
You must log in or register to reply here.

Similar threads

M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
160
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
295
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
B
Fog horn sound
  • brandon4v
  • Jun 22, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
117
SN95 4.6L Mustang Tech Jun 23, 2026
squeak93
J
67 mustang interior courtesy light wiring
  • JCuster
  • Jun 9, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
170
1965 - 1973 Classic Mustangs -General/Talk- Jun 17, 2026
GypsyR
G
D
Loud noise(s) from Engine Bay
  • DuluthFoxbody
  • Oct 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
336
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Thursday at 3:50 PM
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?