I just bought a 2001 bullitt about a month ago. The car came with a MAC before throttle body CAI. I noticed that the screen normally before the MAF is missing. Ialso read in this months Mustangs and fast fords that if the screen is missing that it can lean out the car and mess up the A/F ratio. I just purchased a Densecharger with a 95mm proM MAF and was wondering:
1. Should I purchase a screen to replace the one that is missing, I do not want to damage this engine.
2. Should I be concerned with leaning out the A/F ratio while missing the screen.
3. At what point shoud I look into larger say 24# injectors, or will 19# be sufficient.
I know there is probably 1000 guys/girls missing the screen, but there are probably at least that many torching pistons too.....Please help.
1. Should I purchase a screen to replace the one that is missing, I do not want to damage this engine.
2. Should I be concerned with leaning out the A/F ratio while missing the screen.
3. At what point shoud I look into larger say 24# injectors, or will 19# be sufficient.
I know there is probably 1000 guys/girls missing the screen, but there are probably at least that many torching pistons too.....Please help.