crazypete All my crevices are greased. Oct 22, 2004 930 4 18 Arlington, MA Apr 6, 2006 #1 Apr 6, 2006 #1 I attached a picture and the title says it all. Got a used 4.10 pinion on ebay and it has a chip and a burr on the pinion lip and a little off the ring. Is it usable? The contact patch is outside this area I think. Crummy used parts..... Thanks for looking guys. This one is for the tbird.
I attached a picture and the title says it all. Got a used 4.10 pinion on ebay and it has a chip and a burr on the pinion lip and a little off the ring. Is it usable? The contact patch is outside this area I think. Crummy used parts..... Thanks for looking guys. This one is for the tbird.
Roland69 Sergeant Tangnet Sep 17, 2005 2,867 3 58 Port Elgin, Ontario Apr 6, 2006 #2 Apr 6, 2006 #2 I've seen people use way worse you could try it it should be fine. Just put a good coat of grease on it lol HA HA HA HA. J/K
I've seen people use way worse you could try it it should be fine. Just put a good coat of grease on it lol HA HA HA HA. J/K
302RollinHard New Member Sep 26, 2005 0 0 0 Columbus, OH Apr 7, 2006 #3 Apr 7, 2006 #3 Second that. Clean it real good and throw it in. I have seen way worse.
crazypete All my crevices are greased. Oct 22, 2004 930 4 18 Arlington, MA Apr 7, 2006 #4 Apr 7, 2006 #4 Wow, and I thought I was gonna get a lot of folks saying "heck no, that's toast". I am relieved to hear that. Honestly the guy who sent them should have greased them up a bit any third opinions on these badboys?
Wow, and I thought I was gonna get a lot of folks saying "heck no, that's toast". I am relieved to hear that. Honestly the guy who sent them should have greased them up a bit any third opinions on these badboys?
crazypete All my crevices are greased. Oct 22, 2004 930 4 18 Arlington, MA Apr 7, 2006 #5 Apr 7, 2006 #5 Hey do you need to break in used gears? Just thought of that....
blackstangt Member May 31, 2004 460 1 19 ny Apr 8, 2006 #6 Apr 8, 2006 #6 i would never put something that is definately damaged in my car, but it's up to you... gears, i would heat up a few times and let cool to outside temp in between before beating on... but most say it's not necessary...
i would never put something that is definately damaged in my car, but it's up to you... gears, i would heat up a few times and let cool to outside temp in between before beating on... but most say it's not necessary...