it wont start!!!!

LordMustangGT

Member

Jan 9, 2006

118

0

17

Port Orchard, WA

Jun 17, 2008

#1

• Jun 17, 2008

• #1

Just to start off, I've check power to the FPR & the ECC relay, which none seem to be getting power, and ontop of that I have no spark. I'm thinking the ECU is next in line and I diffently got its little black wire connected at the silond. Think it could go bad just like that. It ran a couple days ago in the other car.

Matt

 

yello05

New Member

Dec 14, 2004

0

0

0

Starbucks!

Jun 18, 2008

#2

• Jun 18, 2008

• #2

did you swap ALL the wiring? The different years vary a lot on wire placement, although the connector hardshells remain the same.

 

LordMustangGT

Member

Jan 9, 2006

118

0

17

Port Orchard, WA

Jun 18, 2008

#3

• Jun 18, 2008

• #3

yello05 said:

did you swap ALL the wiring? The different years vary a lot on wire placement, although the connector hardshells remain the same.

Click to expand...

the only harness I swap was the ECU harness. This is the same way I did it on my 88 2.3 and it started right up.

 

LordMustangGT

Member

Jan 9, 2006

118

0

17

Port Orchard, WA

Jun 18, 2008

#4

• Jun 18, 2008

• #4

ok, found the problem, didn't sleep a wink lastnight thinking about it. The ECC relay was hinden from me was all.. Fired right up, Dont I feel like a dumby