JLT Cold Air Intake

OrangeStang04

New Member

Apr 2, 2005

61

0

0

Covington, KY

Oct 11, 2005

#1

• Oct 11, 2005

• #1

I ran a search and could only find the install on a Cobra... so here are my questions:

(1) Does this kit put the MAF into the fender with the filter.
(2) If so, does the orentation of the MAF cause it to run lean/rich
(3) Does anyone have a picture of it installed on a GT?

Thanks for any help.

 

03MGT

New Member

May 30, 2005

199

0

0

Oct 11, 2005

#2

• Oct 11, 2005

• #2

They have both versions the one that goes in the fender and the one that stayes unber the hood. Look at there site.

 

OrangeStang04

New Member

Apr 2, 2005

61

0

0

Covington, KY

Oct 11, 2005

#3

• Oct 11, 2005

• #3

Yeah I know I saw two things, they have a RAI and the CAI....my main concern is chaning the orentation of the MAF and what effect this may have

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Oct 11, 2005

#4

• Oct 11, 2005

• #4

OrangeStang04 said:

I ran a search and could only find the install on a Cobra... so here are my questions:

(1) Does this kit put the MAF into the fender with the filter.
(2) If so, does the orentation of the MAF cause it to run lean/rich
(3) Does anyone have a picture of it installed on a GT?

Thanks for any help.

Click to expand...

It's hard to tell from the pictures on the site, but it looks pretty clean. On the open element kits (worthless) the MAF harness can be seen. On the fenderwell kits it can't, but I wouldn't think they'd have you extend the harness for that. It's probably on the bottom of the tube, and so long as the MAF sensor itself is sitting facing the air stream, it'll be fine. They have a bunch of pictures on the site.

 

JLstang351

Founding Member

Jun 26, 2001

528

0

0

atl,ga

Oct 11, 2005

#5

• Oct 11, 2005

• #5

Go down to the 8th picture. It shows where the mass air is relocated. same place for a supercharger
http://216.119.83.47/gallery.php?cat=2