Just got my fluidyne. Got q's.

Green_Meanie · May 24, 2004

Ok just got my fluidyne for my 94 GT\auto. I am going to run an aftermarket trans cooler instead of the one in the radiator. My question is do I need to block off the inlet\outlets to the trans cooler in the radiator or can I just leave them open? If they need to be blocked off, what size plugs would I need?

Thanks.

(Yes, I know if I was planning to do this I should have just got a manual Radiator, but hindsite is a ****** )

Guarddog II · May 24, 2004

You could block it off, but why not run it through both for maximum cooling?

I went from auto to TKO and just left them unplugged, can't see why it would hurt unless you want to run fluids through there, then you might want to just cap it off, they aren't plugs, you can screw on a cap that you can get from Home Depot plumbing section.

Just got my fluidyne. Got q's.

Green_Meanie

New Member

Guarddog II

Similar threads

Just got my fluidyne. Got q's.

Green_Meanie

New Member

Guarddog II

Similar threads

Privacy & Transparency

Privacy & Transparency