Just installed NOSzle!

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 14, 2005

#1

• Apr 14, 2005

• #1

I love it. It was a long installation, but well worth it. I have BBK valve covers so the noszles wouldn't fit, so I had to lift up every coil pack and put the nitrous line under the coil and then tighten the coil down. Before I did that there was a big vaccum leak and wouldn't run. I ran dead even with my buddys 04 modded Cobra. I am running the 125 shot and it is so much smoother than the fogger kit I was running. Cant wait to get to the DYNO.
Let me know if you guys want to see pics.

 

Red35th

Member

Apr 18, 2003

609

2

19

Houston, TX

Apr 14, 2005

#2

• Apr 14, 2005

• #2

I assume that you have sprayed it already? I'd be VERY wary until you get that a/f checked and knock down some timing. A number of guys have had a/f issues with the NOSzle kit, particularly the lean spike.

Post up some picts and definatly update with dyno numbers when you get them.

 

Y

YtnGT

Founding Member

Sep 23, 2002

202

0

0

TX

Apr 14, 2005

#3

• Apr 14, 2005

• #3

Congrats on the install

Just make sure you have some cooler copper plugs and enjoy...

BTW most wet systems experience a brief lean spike, it should be ok as long as you keep it to 125.

 

caballo

I'm the bastard love child of a threesome gone awr

Jun 4, 2004

0

0

16

Colorado Springs, CO

Apr 14, 2005

#4

• Apr 14, 2005

• #4

this thread is useless w/o pics...

And Congrats!!!!

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 15, 2005

#5

• Apr 15, 2005

• #5

Pics of Noszles

[/IMG]

[/IMG]

[/IMG]

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 15, 2005

#6

• Apr 15, 2005

• #6

My plugs are 2 steps colder than stock as soon as I can get the extra cash I will get the diablo so I can retard the timing. I got the autometer A/F ratio gauge, but it is a piece of junk I am always lean even when I was on the dyno running lean

 

EDGE Motorsport

Member

Sep 24, 2004

561

2

19

Saleen S281, London, UK

Apr 15, 2005

#7

• Apr 15, 2005

• #7

thats the kit i was looking at too dude, how long did the install take and did you have to pull everything off the inlet manifold to get at it ????

cheers

EDGE

 

O

ONZZ

New Member

Feb 22, 2004

238

0

0

Hawaii

Apr 15, 2005

#8

• Apr 15, 2005

• #8

looks good, how long was the install?

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 15, 2005

#9

• Apr 15, 2005

• #9

Mine was tricky because of the valve covers that I have they are a little taller than the stock ones, so the o-rings on the noszles were not seating right in it's spot, so it took awhile to figure out how to get them to seat in there with out any leaking.
I think with stock valve covers maybe a 6 hour job

 

L

lazer red GTS

New Member

Mar 31, 2005

31

0

0

ennis

Apr 15, 2005

#10

• Apr 15, 2005

• #10

how much did that run you?

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 15, 2005

#11

• Apr 15, 2005

• #11

I got it used for around 700 bucks

 

caballo

I'm the bastard love child of a threesome gone awr

Jun 4, 2004

0

0

16

Colorado Springs, CO

Apr 16, 2005

#12

• Apr 16, 2005

• #12

this thread is useless without dyno sheets and timeslips...

j/k

Looks great!!! keep us updated on the tune....

 

LaserCobra

Founding Member

Dec 11, 2001

497

0

0

Tampa, FL

Apr 16, 2005

#13

• Apr 16, 2005

• #13

Very cool.

Get her to a dyno and see where that A/F is and post some numbers!!!

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 16, 2005

#14

• Apr 16, 2005

• #14

My last n20 setup dyno'd 321 and 395, from my seat of the pants meter I think I am up around 400 and 450

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 16, 2005

#15

• Apr 16, 2005

• #15

I hope in the next week or two we will find out for sure

 

BadMoFo

I will sleep with a Mod for a CT

Founding Member

Sep 28, 2001

2,911

0

0

New Bern NC

Apr 16, 2005

#16

• Apr 16, 2005

• #16

nice, but it looks like one of those lines if awfully close to the belt in the 1st pick. do you know what mods you buddies 04 had? pretty good if you hung with him with you being vert w/ a body kit and all.

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 16, 2005

#17

• Apr 16, 2005

• #17

He has cutouts, predator and a densecharger. He put down 411 rwhp and 395 rwtq.

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 16, 2005

#18

• Apr 16, 2005

• #18

That line just looks close in the picture there is a good two or three inches in between

 

BadMoFo

I will sleep with a Mod for a CT

Founding Member

Sep 28, 2001

2,911

0

0

New Bern NC

Apr 16, 2005

#19

• Apr 16, 2005

• #19

oh ok, figured it was either close or the pic but wanted to point it out just in case it was close cause that would have really sucked to get it ripped of in the belt and all.

 

03poontanggt

New Member

Feb 23, 2004

296

0

0

fresno ca

Apr 16, 2005

#20

• Apr 16, 2005

• #20

thanks for the heads up. I still need to do a little cleaning up under the hood and zip tie down some wires and lines, but it is just about completed.