NIN
New Member
I would hate to get rid of my tfs intake. an Intercooled ATI sound just as good to me. just got to find a place to mount the intercooler.
KB Flowzilla VS S Trim
- Thread starter 94TURBO5 O
- Start date
mystang94gt
New Member
ATI's are some serious blowers too. I would love to have any s/c (yes even a powerdyne LOL) Driving my brother's 94 lighting with an S-trim made me realize how great boost really is. Thing runs 13.1 on a stock motor with 10 lbs of boost and it weighs over 4000 lbs! Gotta love forced induction.
mystang94gt
New Member
Thats the Holley one right? Hmm I didnt know they fit. Let me know how it turns out. I cant wait to put one on my car. Although you should probably just let him sell it to me since your car is already bad azz!!! LOL jk
Zero Signal
Active Member
Nice! It's all about Blozilla/Flowzilla. Alot of the guys with them are running 11's. Some are running 11's with the 1500 blower. The 1500 will be my first real mod.
Well I have been driving both cars today and I really like the KB but after driving it for awhile the torque feel starts to get old 
It kinda flattens out and the S-Trim will keep on pulling. I have switched back and forth and did a lot of tests and I think my S-Trim rocks and has a better sound. I have this car for awhile so I am gonna have to seriously think about this swap. I"ve been staring at these 2 motors in my garage and can not decide which set up will look better. The KB def has more bling and mass but the Cobra intake and the S-Trim look so nice as well.
It kinda flattens out and the S-Trim will keep on pulling. I have switched back and forth and did a lot of tests and I think my S-Trim rocks and has a better sound. I have this car for awhile so I am gonna have to seriously think about this swap. I"ve been staring at these 2 motors in my garage and can not decide which set up will look better. The KB def has more bling and mass but the Cobra intake and the S-Trim look so nice as well.
He has 2 pullies for the KB 9# and 12#. It's currently making 9 psi and my Strim see's about 10-12 #'s. This car is making about 290 to the wheels and runs 13.20's.
The Flowzilla is not on it yet and is supposed to give it around 50+ extra hp. I've noticed some oil leaking around the case of the KB and it concerns me. I'll have to talk to him and see what's the deal with that.
The Flowzilla is not on it yet and is supposed to give it around 50+ extra hp. I've noticed some oil leaking around the case of the KB and it concerns me. I'll have to talk to him and see what's the deal with that.
JR, to run that intake one the KB, you must space out the blower pulley as the holley makes the KB sit farther back towards the firewall. My cousin ran that for a while. The flowzilla only works with the GT40 lower, that is why he switched from the holley to the GT40 style lower.
Damn learn something new everyday. 
I am so leaning torwards just buying this motor from him and not installing the KB on my car now, even after how excited I was about doing this.
My wife sent me this email:
Reasons why not to install the KB,
PROS
~ Something to Do to Stang
CONS
~ Cost to Install - Even if All Goes Well
~ Cost to Uninstall KB & Reinstall Vortech if Dissatisfied
~ Potential for Problem or Mishap/tune
~ Responsibility for Friend's Expensive Stuff
~ Already Unsure of Look
~ Already Sure of Reduced Performance
___________________________________
She always makes good points
I am so leaning torwards just buying this motor from him and not installing the KB on my car now, even after how excited I was about doing this. My wife sent me this email:
Reasons why not to install the KB,
PROS
~ Something to Do to Stang
CONS
~ Cost to Install - Even if All Goes Well
~ Cost to Uninstall KB & Reinstall Vortech if Dissatisfied
~ Potential for Problem or Mishap/tune
~ Responsibility for Friend's Expensive Stuff
~ Already Unsure of Look
~ Already Sure of Reduced Performance
___________________________________
She always makes good points
She's a keeper. My wife bought me most of the stuff on my car. Gotta love chicks that are into cars.
YEAHLOH95
Founding Member
here is A thought and i know its crazy can you run both ????? that would be cool didn't they offer a blower add on for the lightning????
I was thinking of that already, but I don't think it will work. I saw a few years back a twin Paxton set-up that looked really cool and I have not seen one on anyones car yet.VibrantRedGT said:
Gotta give you 3 thumbs for those points. 
Black95GTS
Active Member
dual superchargers? That would be like... 4 tornados!
My only Kenne Bell problem is: say your driving, and it rains out just a little bit, enough to get the road wet. You approach a stop light that is on a reasonably steep uphill. Try having a gentle start with full boost at 2K, a car in front of you and one behind you. That would suck. I think they sacrifice too much streetability.
My only Kenne Bell problem is: say your driving, and it rains out just a little bit, enough to get the road wet. You approach a stop light that is on a reasonably steep uphill. Try having a gentle start with full boost at 2K, a car in front of you and one behind you. That would suck. I think they sacrifice too much streetability.
Black95GTS- boost on the KB is throttle responsive, meaning you don't see boost until you mash the throttle so put your fears to rest. 
Black95GTS
Active Member
ahhh I was wondering about that. My friend's jackson racing s/c has a similar system, but its a roots s/c. I always thought that the twin screw system had hangups in that regard, but apparently not. thanks!
WhiteDevil
New Member
Car has a Steeda 19 and TFS heads.
Yes Paul is correct, it only buries the boost needle when you get down on it.
Don't get me wrong...it's a damn nice set up but I really think that after driving it around that I really just love the sound of my S-Trim and the boost increase curve.
When I asked him the other day if it was a 1.5 he said no so with that I just assumed it was a 2.2. (So for the record) I STAND CORRECTED.
It is actually a 1800 with the Flowzilla inlet. I thought they only made a 1500 and a 2200
Yes Paul is correct, it only buries the boost needle when you get down on it.
Don't get me wrong...it's a damn nice set up but I really think that after driving it around that I really just love the sound of my S-Trim and the boost increase curve.
94SC50 said:
When I asked him the other day if it was a 1.5 he said no so with that I just assumed it was a 2.2. (So for the record) I STAND CORRECTED.
It is actually a 1800 with the Flowzilla inlet. I thought they only made a 1500 and a 2200
BlueOvalStangGT
Active Member
mercury is making a new engine with 2 twin screw supercharges in a 9.1 liter engine making 1075 hp. thats for a boat tho but i guess you can put 2 blowers in an engine
Similar threads
- Locked
