• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Keyless Entry Wiring Help!!!!!!!!!

  • Thread starter Thread starter roadrunner19va
  • Start date Start date Oct 23, 2005
R

roadrunner19va

New Member
Oct 1, 2005
63
0
0
Oct 23, 2005
#1
  • Oct 23, 2005
  • #1
I have a 1993 Mustang LX 5.0. I have hooked up a Crimestopper Keyless Entry system on it. I have it all hooked up except for the door locks and the trunk pop. Does anyone know how and what color wires to hook up. I used a relay to convert the neg. pulse into a possitive. but I still can not get it to work. I am getting pissed. Please someone help. Let me know what I can do to get this hooked up. I have installed at least five of these in cars and I can not find out how to do this one. Thanks Travis
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 23, 2005
#2
  • Oct 23, 2005
  • #2
Travis, welcome to the boards.

As you know, for the trunk popper, grab the output at the trunk switch in the glove box.

For the locks, I grabbed the wires at the top of the driver kick panel. Not sure what you mean about converting neg to positive pulse (unless that was for the trunk popper, which might not have had an onboard relay for it anyhow.

More info on where you are stuck might help.

Good luck.
 
R

roadrunner19va

New Member
Oct 1, 2005
63
0
0
Oct 24, 2005
#3
  • Oct 24, 2005
  • #3
Wiring help.

I took a test light and found the wires for the locks. When I push the lock and unlock buttons on the door it causes the wires to have 12V pos. My alarm has Negative outputs for the lock and unlock. Which means when I hit lock or unlock on the remote fob, the alarm wires that I hook up to the factory wires will have a negative pulse. I think I need relays to make that a positive pulse. I hope everyone understands what I am saying. Did anyone have to use extra relays for the door locks? Please someone help me I have been trying to figure this out for two days. Thanks for any info. Thanks Travis
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 24, 2005
#4
  • Oct 24, 2005
  • #4
So you dont have onboard relays for your keyless from the sound of it. You would need to use two SPDT relays (one for lock, one for unlock). The way you actually wire up the relay is a little open, so presenting what you have planned exactly helps (you need a control ground and control 12 volts for the relay to actuate - you can switch either one).

Good luck.
 
You must log in or register to reply here.

Similar threads

3
Electrical Starter solenoid green wire?
  • 387lx
  • Jun 1, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
249
Fox 5.0 Mustang Tech Jun 2, 2026
AeroCoupe
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
219
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
587
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
M
Need help please
  • Mikey62666
  • Oct 12, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
130
2005 - 2014 S-197 Mustang -General/Talk- Oct 14, 2026
gkomo
C
Fox 1993 LX 2.3 Wiring
  • Coyoteswap93
  • Jul 13, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
274
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 13, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?