Leaking AOD, what is this bolt?

Mstng93SSP

You have a nice rear end there Dave.

15 Year Member

Nov 29, 1999

2,993

3,500

184

Mililani, Hawaii

Nov 15, 2018

#1

• Nov 15, 2018

• #1

I had a pretty bad leak in my AOD in my 90 convertible. It was leaking from a bolt on the Driver's side, right above where the shift linkage bolts on. (See picture) I tightened it and the leak stopped. What is that bolt for? Just curious.



The picture is actually of a spare AOD I have, but same bolt.

Thanks

Chris

 

JD1964

there is enough sticking out to grab on to

15 Year Member

Jun 28, 2013

3,605

1,611

194

Maryland

Nov 15, 2018

#2

• Nov 15, 2018

• #2

I'm pretty sure its a test port to connect a pressure gauge. It allows technicians to check line pressures during running operation.

 

Reactions: 90sickfox

CarMichael Angelo

my rearend will smell so minty fresh,

15 Year Member

Nov 29, 1999

10,641

8,909

234

Birmingham, al

Nov 15, 2018

#3

• Nov 15, 2018

• #3

Just like John says, I too think it's a diagnostic line pressure port.

 

Mstng93SSP

You have a nice rear end there Dave.

15 Year Member

Nov 29, 1999

2,993

3,500

184

Mililani, Hawaii

Nov 15, 2018

#4

• Nov 15, 2018

• #4

Thanks.

 

markinms

5 Year Member

Mar 1, 2018

88

14

18

Columbus MS

Nov 18, 2018

#5

• Nov 18, 2018

• #5

Just wanted confirm what was stated above. This is the "main line" pressure tap used for diagnosis. If you ever need to test at this port, be sure to use a pressure guage that read up to 300 psi. Idle pressure should be 75-90 psi while WOT pressure should be 241-290 psi.

Mark

 

Reactions: 90sickfox