• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Electrical Led Lights?

  • Thread starter Thread starter ShadeSN95
  • Start date Start date Oct 27, 2013

ShadeSN95

Member
Oct 27, 2013
5
0
12
Oct 27, 2013
#1
  • Oct 27, 2013
  • #1
Hey guys im new to this forum, i have a 95 mustang v6 its my DD
I'm trying to replace some lights behind the odometer but frankly i have no idea how to take it out

First Post !
 

94GTCoupe

10 Year Member
May 7, 2006
1,412
92
79
CA
Oct 28, 2013
#2
  • Oct 28, 2013
  • #2
Pull the head light knob to "on".
Rotate knob until you can see the cut out on the side.
With pick, pull up on metal clip inside the cut out while pulling on the knob.

Remove 2 t45(? Cant remeber the size off hand) Screws at the top of the cluster bezel.
At edges, pull bezel to release the clips.

Remove 4 t45(?) Around cluster.
Pull cluster out enough to remove the two wire connectors at the rear top of the cluster, just press the tab down at the center of each wire connector.

At the back of the cluster, there are a series of twist knobs.
Those hold the cluster bulbs.
 
Reactions: ShadeSN95

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Oct 28, 2013
#3
  • Oct 28, 2013
  • #3
here's a good write up too with pictures of everything:
http://www.sn95forums.com/showthread.php?14693-SN95-LED-Gauge-Cluster
 
Reactions: ShadeSN95

ShadeSN95

Member
Oct 27, 2013
5
0
12
Oct 28, 2013
#4
  • Oct 28, 2013
  • #4
Thank you both so much
 

toyman

10 Year Member
Jul 19, 2007
1,944
54
79
Vernon BC
Oct 28, 2013
#5
  • Oct 28, 2013
  • #5
Aren't LED's polarity specific? If they are and you have the bulb "reversed" they won't light up. I had that issue a couple of years ago.
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Oct 29, 2013
#6
  • Oct 29, 2013
  • #6
correct. they only light up one way. always test them before putting everything back together.
 

ShadeSN95

Member
Oct 27, 2013
5
0
12
Oct 29, 2013
#7
  • Oct 29, 2013
  • #7
ProKiller said:
correct. they only light up one way. always test them before putting everything back together.
Click to expand...
Very good to know thank you both.. im going to be following that guide up there for the weekend >
 
You must log in or register to reply here.

Similar threads

S
All power lost at crank
  • saf_blu302
  • Mar 7, 2026
  • 1994 - 1995 Specific Tech
Replies
4
Views
264
1994 - 1995 Specific Tech Mar 12, 2026
General karthief
Y
2004 Roush - Dome Lights and radio not working
  • Yurei
  • Nov 10, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
413
1996 - 2004 SN95 Mustang -General/Talk- Nov 20, 2025
squeak93
6
2010 V6 Sees differently than GT?
  • 6t9Mach1
  • Mar 31, 2026
  • 2010 - 2014 Specific Tech
Replies
2
Views
200
2010 - 2014 Specific Tech Apr 1, 2026
6t9Mach1
6
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
660
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
95
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?