Lets talk safety

General karthief · Oct 6, 2023

On a safety note, since that's what this is all about, when I was watching Street Outlaws, several cars with in car cameras I could see the drive shaft/U joint spinning, exposed right by the drivers thigh, elbow area, this was on an NHRA track. Ryan Martin even had one explode sending pieces through the roof! Surely rules mandate some cover on the inside of the car in that area. I would want some kind of armor in that area.
I also noticed a lot of exposed transmissions.
Is this just unReality TV BS ?

srtthis · Oct 6, 2023

General karthief said:
On a safety note, since that's what this is all about, when I was watching Street Outlaws, several cars with in car cameras I could see the drive shaft/U joint spinning, exposed right by the drivers thigh, elbow area, this was on an NHRA track. Ryan Martin even had one explode sending pieces through the roof! Surely rules mandate some cover on the inside of the car in that area. I would want some kind of armor in that area.
I also noticed a lot of exposed transmissions.
Is this just unReality TV BS ?

No the pro275 car we race has an exposed trans... NHRA requires a box around it now but I have mixed feelings about that. With the amount of harmoninics these cars put out it rattles everything loose. Even the beadlock bolts on the rear tires. We had a trans fitting come loose that goes to an external trans cooler if that trans was boxed in for how NHRA wants it done we would have never caught the leak and would have put enough fluid out to get every where under the car.

As for the exposed u joints... same guy who built Ryan's car built the pro275 car we race. He actually built the new car right after this one. If he was running the lock up 400 his u joint would have been under the tunnel. But he now runs the titanium driveshaft tunnel back over the tail shaft.

Bullitt347 · Oct 6, 2023

I have everything the NHRA rule books says I need.
Some stuff is overkill, like the Helmet, I buy the best one that I can afford. I only got one head (empty though it is) so max protection there.
I also use a Hans Device, when a neck collar will pass tech.
One piece suit, no gaps.
Gloves, shoes, head sock, and all of that.
Car is chassis legal to 8.5 in the 1/4, but it will blow through that with ease.
So I do mostly 1/8 mile racing where the chassis is still legal for the ET/MPH

85GTStangGuy · Oct 6, 2023

General karthief said:
No socks
No shoes
No ~~problem~~ service

Fixt

General karthief · Oct 6, 2023

85GTStangGuy said:
Fixt

TOOLOW91 · Oct 7, 2023

srtthis said:
Yea your car is so nice id have to make sure who ever did the cage could tuck it tight to everything and still be able to put everything back in. But also on the flip side it's mostly street driven and a cage on the street is super dangerous also. This is one of the reasons I'm building another car.

That’s why I’m leaning toward a 6 point bolt in deal . Team z although I also am not in love with all of their stuff seams to make a nicest one

srtthis · Oct 7, 2023

TOOLOW91 said:
That’s why I’m leaning toward a 6 point bolt in deal . Team z although I also am not in love with all of their stuff seams to make a nicest one

I'd find someone to make me a custom bolt in cage and pay 5 times what a team z cage costs just not to buy any more of their junk

TOOLOW91 · Oct 8, 2023

srtthis said:
I'd find someone to make me a custom bolt in cage and pay 5 times what a team z cage costs just not to buy any more of their junk

Yeah that defeats the purpose of ordering one up lol. May as well have him do the 8.50 cert at that point

srtthis · Oct 8, 2023

TOOLOW91 said:
Yeah that defeats the purpose of ordering one up lol. May as well have him do the 8.50 cert at that point

True... and that point you'll be in the boat I am and wish you would have went 25.5 LOL

revhead347 · Oct 8, 2023

2000xp8 said:
While me personally i have absolutely no interest in a cage, i've always wondered if the theory was that if you have an accident with a cage and no helmet you are likely to smack your head on the bar.

And i think driving a manual trans foxbody with flip flops is idiotic.

Correct, that is why they make padding for the cage bars. You pad the bars when you drive on the street.

I drive in flip flops all the time. Never had an issue.

Kurt

General karthief · Oct 8, 2023

I drive in bare feet

srtthis · Oct 9, 2023

revhead347 said:
Correct, that is why they make padding for the cage bars. You pad the bars when you drive on the street.

I drive in flip flops all the time. Never had an issue.

Kurt

Not sure what I'd rather hit my head on... SFI roll bar padding or the bar itself. That stuff is hard AF

2000xp8 · Oct 9, 2023

revhead347 said:
Correct, that is why they make padding for the cage bars. You pad the bars when you drive on the street.

I drive in flip flops all the time. Never had an issue.

Kurt

I've had them get caught under a pedal (just the flip flop, not my foot).
I don't find anything wrong with driving a modern car with flip flops, but 3 pedals, a somewhat heavy clutch and a tight pedal area make a fox not one of those cars i want to drive that way.

Bullitt347 · Oct 9, 2023

Last time I wore flip flops I was maybe 12 years old. I don't wear them or crocs, sandals or anything like that. It is either bare feet or shoes. That's it.

revhead347 · Oct 9, 2023

2000xp8 said:
I've had them get caught under a pedal (just the flip flop, not my foot).
I don't find anything wrong with driving a modern car with flip flops, but 3 pedals, a somewhat heavy clutch and a tight pedal area make a fox not one of those cars i want to drive that way.

I have stepped into the world of a twin disk and a hydraulic clutch. Flip flops it is.

Kurt

2Blue2 · Oct 9, 2023

limp said:
I have been in florida for 12 years, don't think I own any shoes anymore........

Lol, this sounds like me.

90sickfox · Oct 11, 2023

I've gotten several 10 point roll xage kits from S&W racing. There worked out really well in the past. I should have a cage in my fox but I'd also have to change the seats.

Lets talk safety

General karthief

wonder how much it would cost to ship you a pair

srtthis

the guy doing it does every local racers rear end

Bullitt347

I have been doing it wrong this whole time

85GTStangGuy

General karthief

wonder how much it would cost to ship you a pair

TOOLOW91

If you're the village idiot what's that make me?

srtthis

the guy doing it does every local racers rear end

TOOLOW91

If you're the village idiot what's that make me?

srtthis

the guy doing it does every local racers rear end

revhead347

Apparently my ex-husband made that mistake.

General karthief

wonder how much it would cost to ship you a pair

srtthis

the guy doing it does every local racers rear end

2000xp8

Bullitt347

I have been doing it wrong this whole time

revhead347

Apparently my ex-husband made that mistake.

2Blue2

will be trying this sex one when I can find it

90sickfox

Wasn't a pretty sight...and I've got big hands

Similar threads

Lets talk safety

wonder how much it would cost to ship you a pair

the guy doing it does every local racers rear end

I have been doing it wrong this whole time

wonder how much it would cost to ship you a pair

If you're the village idiot what's that make me?

the guy doing it does every local racers rear end

If you're the village idiot what's that make me?

the guy doing it does every local racers rear end

Apparently my ex-husband made that mistake.

wonder how much it would cost to ship you a pair

the guy doing it does every local racers rear end

I have been doing it wrong this whole time

Apparently my ex-husband made that mistake.

will be trying this sex one when I can find it

Wasn't a pretty sight...and I've got big hands

Similar threads

Privacy & Transparency

Privacy & Transparency