• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Lifter tick

  • Thread starter Thread starter Creomod
  • Start date Start date Oct 31, 2024
Prev
  • 1
  • 2
First Prev 2 of 2

Creomod

5 Year Member
Sep 14, 2018
511
42
48
San Antonio,Texas
Nov 9, 2024
#21
  • Nov 9, 2024
  • #21
Mac131 said:
It won't hurt anything if you decide to pull the lifters. It's not as critical on a roller cam, but put the lifter in the hole it came out of and if you want, mark the orientation too. I'd also shine a light into the holes to inspect each cam lobe.
Click to expand...
Damm I didn’t think of inspecting the cam. I replaced the lifters and let the gasket dry a few days I came to Dallas to see Lincoln park in concert. When I get home I’ll fire it off hope that noise goes away. It wasent bad but I did catch my attention
 
Reactions: Mac131

Mac131

Active Member
Aug 9, 2024
229
203
53
USA
Nov 9, 2024
#22
  • Nov 9, 2024
  • #22
As long as the rollers on your old lifters are ok, the cam should be as well.
 

Creomod

5 Year Member
Sep 14, 2018
511
42
48
San Antonio,Texas
Nov 10, 2024
#23
  • Nov 10, 2024
  • #23
Damm I swapped the lifters and I still hear a ticking sound. I Annoyed. Should I be concerned or when should I be concerned cuz I’m concerned
 
Last edited: Nov 10, 2024
Reactions: gkomo
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
330
Fox 5.0 Mustang Tech May 11, 2026
keel
P
Weird Voltage & Oil Pressure Gauges
  • PNN
  • May 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
30
SN95 V6 Mustang Tech May 22, 2026
PNN
P
G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
501
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
56
1996 - 2004 SN95 Mustang -General/Talk- May 29, 2026
Mhaley2006
M
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?