lil' mo' progress

#21
Killercanary said:
For ride quality and looks you can't go wrong with the FMS B springs. The ride won't be as harsh as with the C's and its not a in the weeds amount of drop. Its a nice compromise.
Click to expand...

Idk Paul, mine rides just like stock with the Cs. Also, Cs sit relatively high comparatively to an Eibach Sport or the like. I had to cut my Cs a little to get em low enough. But I certainly agree, coil overs are great, but cost way too much for me.
 
#26
Got off early today and was able to install the American Thunder cat back ...went real smooth except I had to have the wife run to get me longer bolts..:rolleyes:
I liked the Borla's but I wanted to go back to rear exhaust and a little more agressive sound again....see that I need to sand and paint a little under the car....:rlaugh:

mustang001-1.webp


and a little something to hit the bass at the beginning of Thunderkiss :rlaugh:

mustang002.webp
 
#27
drakesdad said:
thanks Aaron, I am still waiting for more pics on your project...I know you have been making the $......:canada:
Click to expand...


haha, I make more than I should but I spend more than I used to...i don't quite understand the logic

As for the project, the main reason I haven't gotten too many pictures out is simply because I absolutely hate the idea of showing off my car when it's not completed. I have lots of pics of it at it's current state, but I'm so excited to have a solid "Finished" thread that just shows the end result.

I think my patience turned to lack of motivation for a while, but ever since I got down to VA to pick up my 358, I've been digging in hard trying to get the details taken care of. Last peice I'm missing is a simple set of 83 GT mounts to keep the engine lower in the bay. There's other peices I'll need, but I'm not too worried about'em yet.

OK I'll stop jacking your thread now haha

Cheers,
 
#28
xr8d302 said:
haha, I make more than I should but I spend more than I used to...i don't quite understand the logic

As for the project, the main reason I haven't gotten too many pictures out is simply because I absolutely hate the idea of showing off my car when it's not completed. I have lots of pics of it at it's current state, but I'm so excited to have a solid "Finished" thread that just shows the end result.

I think my patience turned to lack of motivation for a while, but ever since I got down to VA to pick up my 358, I've been digging in hard trying to get the details taken care of. Last peice I'm missing is a simple set of 83 GT mounts to keep the engine lower in the bay. There's other peices I'll need, but I'm not too worried about'em yet.

OK I'll stop jacking your thread now haha

Cheers,[/QUOTE
Hell Aaron, don't worry about jack'n my thread...I don't care at all, I normally mess up someone else's...:rlaugh::rlaugh: I understand waiting for the finished project and thought about the same thing.......but I figured what the hell.....I'll post anyway.....:shrug: I am very anxious to see yours back on the road....I remember the little "taste" of the quarter pic you let out.........if your not going to post progress pics...GET YOUR AZZ out to the garage and stay in it until it gets finished...:jaw:
k
Click to expand...
 
#31
thethirdeye88 said:
i like your stang...the two tone is nice and i took my wing off as well...
Click to expand...


Thanks a lot......I am close to finishing the planned project......BUT I don't like it wingless...I have a wing that should be finished this weekend ...it had a run under it so it needs to be fixed......I see some SN's that can pull off the no wing look...and they look awesome...I think a good raised hood, wide azz 315's, tinted window and a nice drop look good with no wing......have you got a pic of yours without the wing?


MM.....I have decided that I will drop it....seems to be the consensus......:nice:
It will be a little bit due to I am not a fan of charging parts on the cc and I want to due it right with ALL the correct parts so it may take a little while..have a few more things going with the current project....I'll make a deal with you Jinx...I'll drop it when you get the MM back on road duty.....:eek:
 
#33
drakesdad said:
Hell Aaron, don't worry about jack'n my thread...I don't care at all, I normally mess up someone else's...:rlaugh::rlaugh: I understand waiting for the finished project and thought about the same thing.......but I figured what the hell.....I'll post anyway.....:shrug: I am very anxious to see yours back on the road....I remember the little "taste" of the quarter pic you let out.........if your not going to post progress pics...GET YOUR AZZ out to the garage and stay in it until it gets finished...:jaw:
k
Click to expand...

haha.....

DSC_0065.webp


I let out the odd picture....but once those mounts are in, the car will sit properly and you'll see the first pictures coming about...
 
#35
You must log in or register to reply here.

Similar threads

C
Paint and Body Help!! 66 Convertible, unknown part
Replies
4
Views
185
1965 - 1973 Classic Mustangs -General/Talk-
Candyapple66
C
M
Progress Thread mkk50's Progress Thread
Replies
19
Views
673
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Noobz347
Noobz347
K
Thanks for adding me.
Replies
1
Views
68
The Welcome Wagon
DadLife0724
DadLife0724
Blue85
Paint and Body Windshield molding
Replies
0
Views
73
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Blue85
Blue85
DadLife0724
Progress Thread No Clear 92 (Lack of) Progress thread
Replies
35
Views
736
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
General karthief
General karthief
Top Bottom
Back
Forums
Menu