Little bit of interior focus

Emay

Member

Oct 4, 2006

228

1

18

South Elgin, IL

Feb 27, 2009

#21

• Feb 27, 2009

• #21

Req, I lost track in dollar invested. Understand there isn't anything in conjuction with install labor. All thats been done by me.

Regarding the tint, yes mine is far more reflective, it's actually metallic based. I'll put it to you this way my tollway I-pass can't even read through the strip across the top of my windshield.

 

NastyStang113

New Member

Sep 12, 2008

1,567

1

0

Florida

Feb 27, 2009

#22

• Feb 27, 2009

• #22

My tint is metallic based as well. I just went through this problem trying to reroute my NAV antenna. I ended making a bracket under the wiper cowl to mount the antenna on, it works great !!

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Feb 27, 2009

#23

• Feb 27, 2009

• #23

that would look good with my shifter boot and console lid.

 

Emay

Member

Oct 4, 2006

228

1

18

South Elgin, IL

Feb 27, 2009

#24

• Feb 27, 2009

• #24

NastyStang113 said:

My tint is metallic based as well. I just went through this problem trying to reroute my NAV antenna. I ended making a bracket under the wiper cowl to mount the antenna on, it works great !!

Click to expand...

I'm going to try low on the passenger side pillar. See how things go there..

 

Sparty92

Member

Jul 30, 2007

430

5

19

Detroit Burbs

Feb 28, 2009

#25

• Feb 28, 2009

• #25

Nice, clear photographs. Good job on that!

Not a big fan of faux carbon fiber, but your piece was well-made. I'm not a fan of the easily scratched plastic OEM console.

 

NastyStang113

New Member

Sep 12, 2008

1,567

1

0

Florida

Feb 28, 2009

#26

• Feb 28, 2009

• #26

Emay said:

I'm going to try low on the passenger side pillar. See how things go there..

Click to expand...

The only place inside my car that I could get any signal was in the headliner right above the driver's seat. It wasn't enough to be accurate though. I'd just put it under the wiper cowl like I did. In the end you'll be much happier. I used a little metal epoxy under each corner of the antenna so I don't have to worry about it ever coming off.

 

S

shelby69

New Member

Mar 19, 2002

100

0

0

allentown

Feb 28, 2009

#27

• Feb 28, 2009

• #27

looks good, nice and clean install