I want to lower my mustang in the front about 2 inches i bought some lowereing spindles but they caused my rims to not work so does anyone know of lowering parts that work with the original 13" rims?
I want to lower my mustang in the front about 2 inches i bought some lowereing spindles but they caused my rims to not work so does anyone know of lowering parts that work with the original 13" rims?
You could buy fox body springs like I did. ( 86 GT v-8 ) Then proceed to cut, install , remove ,cut ,reinstall. The springs are fairly inexpensive from autozone or advance. 1 wrap, or coil equals about 1 inch. But a word of caution, after the first wrap comes off, reduce cutting to half a coil and then a quarter till you get it where you like it. These springs have a better rate than the mustangII springs, they do not bounce like the ii's and will over all give a better ride.
If your buying new spring to cut, before you get to far install them and let them settle for a couple weeks otherwise you may end up lower than you want.