Lug nut key is stripped-What to do?

4

4.6modular

New Member

Dec 5, 2003

141

0

0

Springfield, MO

Apr 23, 2004

#1

• Apr 23, 2004

• #1

Trying to rotate my tires today and the lug nut key was stripped as well as one of the lug nuts that use the key. This was the first time that I myself have even attempted to use it or take my wheels off, so that tells me that one of the techs that have worked on my car did it before hand. Damn techs and there impact guns!!!!!! I plan on buying some steeda locking lug nuts after I get the current lugs off, but until then what can be done to get them off?

 

XTONKAX

New Member

Dec 5, 2002

619

0

0

UT

Apr 23, 2004

#2

• Apr 23, 2004

• #2

4.6modular said:

Trying to rotate my tires today and the lug nut key was stripped as well as one of the lug nuts that use the key. This was the first time that I myself have even attempted to use it or take my wheels off, so that tells me that one of the techs that have worked on my car did it before hand. Damn techs and there impact guns!!!!!! I plan on buying some steeda locking lug nuts after I get the current lugs off, but until then what can be done to get them off?

Click to expand...

Damn tech and an impact gun can help you get them off. With the understanding that they'll never be used again. Purchase some more lug nuts for replacement. I discovered this method after my first flat. Bought the car used.

 

Turbo92PGT

Member

Feb 17, 2003

746

0

16

Auburn Washington

Apr 23, 2004

#3

• Apr 23, 2004

• #3

It probably wont work for your mustang, but on my Probe I lost the lock key and ended up pounding a socket over the locking lug nuts. Then I would just attach a socket wrench on the end it 'it would come right off. If that wont work, take it back to the techs or whatever. You could also weld on a bolt to the nut, and then use a different size socket (that will fit the bolt) to take it off. I wish you were located by me, cuz I'd weld it for you. I just got a mig welder on sunday, already gone through a spool of wire and am out of metal to weld lol. It sucks =/ I wanna get some subframes soon

 

S

saleen137

New Member

Nov 11, 2003

199

0

0

Bellflower

Apr 23, 2004

#4

• Apr 23, 2004

• #4

pound the hell ouf it with a hammer, but i learned the hard way. It does sound like a good idea to weld a bolt to the nut and try it from there.

 

wms004

Founding Member

Jan 15, 2002

2,864

2

49

Los Angeles

Apr 23, 2004

#5

• Apr 23, 2004

• #5

you can take a socket and hammer the socket on there so that you can then use your socket wrench to get it off. thats what America's tire company did to get mine off when i lost the key.

-wade

 

Stanged78

New Member

May 28, 2003

138

0

0

Lake in the Hills, IL

Apr 23, 2004

#6

• Apr 23, 2004

• #6

This happened to me recently as well. I took it to a local garage, where they attempted to use the impact gun again and the original (though stripped) key. When that failed, they put a chisel attachment on the impact gun, chiseled a notch in the wheel lock, and it came right off. You could try this method by hand if you want, but it's no big deal for a shop to do it. If they actually charge you for the service, it shouldn't be more than 10 or 15 bucks. It only takes them 5 minutes, including the time it takes to walk to your car and back to the shop.

 

Turbo92PGT

Member

Feb 17, 2003

746

0

16

Auburn Washington

Apr 23, 2004

#7

• Apr 23, 2004

• #7

Its a different nut all together, but when we did the struts on my last car for the first time, the nut on the strut shaft wouldn't come off at all, it woudlnt' come off for anything. We tried impact guns... everything. We ended up chiseling it off. That finally worked, took a long time though. We just used a 'cold chisel' and a hammer lol

 

XTONKAX

New Member

Dec 5, 2002

619

0

0

UT

Apr 23, 2004

#8

• Apr 23, 2004

• #8

Leave it in a bad neighborhood. They have their ways.

 

hognutz

New Member

Nov 12, 2002

1,940

0

0

albany, oregon

Apr 23, 2004

#9

• Apr 23, 2004

• #9

two solutions. socket and a hammer. or chisle and a hammer. you can usually grove the lug with a chisle. then hitting at an angle you can get enough force to get it turning. this is my prefered method as it does not abuse tools. IT is really pretty easy most of the time unless some retard has overtorqued you lug. most of the time lugs are torqued to around 90lbs and that is not to bad.

 

G

grk_stangsta

New Member

Jan 21, 2003

75

0

0

havertown, pa

Apr 23, 2004

#10

• Apr 23, 2004

• #10

XTONKAX said:

Leave it in a bad neighborhood. They have their ways.

Click to expand...

HAHAHAHA

 

Madi98GT

Founding Member

Feb 18, 2002

293

0

16

Naperville, IL

Apr 23, 2004

#11

• Apr 23, 2004

• #11

Or do it the easy way. I left my locking lug nut key at the track a few weeks back. Look for the McGard identification card, it will have the info to order a replacement key. I actually had mine, it was in the trunk by the spare tire. Cost me $10 and they mailed out a new one, took about 1 week to get.

 

dmsead

New Member

Nov 27, 2003

34

0

0

NW Ohio

Apr 23, 2004

#12

• Apr 23, 2004

• #12

The dealership should have a universal set of lug nut keys. I usually will zip off a set of locking lugs for free, other places might charge a few bucks. The nice thing about having that master set is that I don't have to search through the customer's car to find the hidden key, and I don't get accused of damaging or losing the customer's key.

When I don't have a key that fits, I use a twist socket that will take off either locking lug nuts or rounded nuts. It basically has a reverse-threaded spiral that grabs the nut and zips it off. Then the offending locking lug can be safely deposited in the nearest trash can, where it can cause no more frustration, and replaced with a real lug nut.

 

4

4.6modular

New Member

Dec 5, 2003

141

0

0

Springfield, MO

Apr 23, 2004

#13

• Apr 23, 2004

• #13

XTONKAX said:

Leave it in a bad neighborhood. They have their ways.

Click to expand...

Thats some funny LOL stuff right there. Thanks alot guys.