MACH 460 wiring harness.

supergoat · Jan 18, 2007

I did some searching and I understand that if I'm JUST installing a new head unit I only need to get a new harness, available at Wal-mart and the like. And that I don't have to re-wire anything.

Am I correct on this?

san~man · Jan 18, 2007

Yes, look in 4.6talk. Bullitt owner replaced his 6 disc unit and needed an aftermarket Metra wiring harness.

droid#83853 · Jan 18, 2007

I think there are actually two harnesses. One for the radio, and another for the amps hookup. I am researching this. I went to Metra, and they list three different harnesses for the amp, and a radio power one. I guess they are all the same.

COramprat · Jan 18, 2007

You need the FDK-10 harness and the SLC-4 amp interface by Scosche. Wal Mart should have them.

Double check your vehicle here

supergoat · Jan 18, 2007

Thank you!

I was reading that the amp interface is only needed if I'm adding an aftermarket amp, or is that wrong? I'll buy both anyway just to be safe.

supergoat · Jan 19, 2007

COramprat said:
You need the FDK-10 harness and the SLC-4 amp interface by Scosche. Wal Mart should have them.

Double check your vehicle here

Update. Those are NOT the correct adapters for a 2004 Mach 460 system. I'm having to order the correct adapter. Sucks, I spent all that time wiring up the wrong adapter.

The correct adapter for a 2004 Mch 460 system is Metra 70-5521. It allows you to keep the factory amp as well.

COramprat · Jan 19, 2007

supergoat said:
Update. Those are NOT the correct adapters for a 2004 Mach 460 system. I'm having to order the correct adapter. Sucks, I spent all that time wiring up the wrong adapter.

The correct adapter for a 2004 Mch 460 system is Metra 70-5521. It allows you to keep the factory amp as well.

Thats why I had Double check yoiur vehicle here. and it linked you to the companies site...

supergoat · Jan 20, 2007

COramprat said:
Thats why I had Double check yoiur vehicle here. and it linked you to the companies site...

I did and it does has the MACH system listed up to 2000. I decided to give it a shot, didn't work. So I decided to post that it wasn't correct and then list the correct one for the 03-04 years incase anyone else was looking. I wasn't trying to say that you were wrong.

COramprat · Jan 20, 2007

supergoat said:
I did and it does has the MACH system listed up to 2000. I decided to give it a shot, didn't work. So I decided to post that it wasn't correct and then list the correct one for the 03-04 years incase anyone else was looking. I wasn't trying to say that you were wrong.

Oh bummer...yea I just copied and pasted a post I made several months ago. I didn't realize the thing had changed.

MustangLife · Jan 21, 2007

So is there a link for the correct harnesses for 03,04 years

supergoat · Jan 21, 2007

http://www.installer.com/item/display_item.php?it=70-5521

I found that through a LOT of google searching. I ordered it. When I receive it, I'll do a writeup on the install.

MACH 460 wiring harness.

supergoat

New Member

san~man

O-G

droid#83853

carfax for friendship

COramprat

...I can take it. I think.

supergoat

New Member

supergoat

New Member

COramprat

...I can take it. I think.

supergoat

New Member

COramprat

...I can take it. I think.

MustangLife

Active Member

supergoat

New Member

Similar threads

MACH 460 wiring harness.

New Member

O-G

carfax for friendship

...I can take it. I think.

New Member

New Member

...I can take it. I think.

New Member

...I can take it. I think.

Active Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency