- May 9, 2011
- 19
- 0
- 0
What am I doing wrong? This looked so straight forward but as soon as I removed the stock air filter box I realized that the K&N was a different diameter than the intake (see picture). When I insert the filter into the intake hose it is just too loose, there is no way a clamp could tighten enough to make a proper fit.
To make matters worse I cut up my stock air box trying to make a collar to make this work so now I have no filter at all. I bought the ram air kit used so I don't have any instructions either.
If you have one, or know what I am talking about please help. I need to drive the car tomorrow.
To make matters worse I cut up my stock air box trying to make a collar to make this work so now I have no filter at all. I bought the ram air kit used so I don't have any instructions either.
If you have one, or know what I am talking about please help. I need to drive the car tomorrow.