• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

mark 8 in 99 V6 IT'S ALIVE

  • Thread starter Thread starter 1stanger1
  • Start date Start date Jul 29, 2009

1stanger1

Member
Jul 3, 2005
172
1
17
in my house
Jul 29, 2009
#1
  • Jul 29, 2009
  • #1
i laugh in everyones face that doubted me ,lots of people said it would never run......specially bill he said that my "hodge podge" of parts would never work well hmmmm i found i had 8 burned out injectors and temporarily replaced them with 19 pounders so now that i found out that thats what was wrong i am on a quest to find another set of 24's

thanks to all who gave advice especially one member in particular

tommy cummings (GT_TOMMY)

thanks i will be sure and do a write up on what all i have done to get this thing runnin for further searches and further swaps....maybe someone will make it a sticky or some stuff.......
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,391
3,537
233
Jul 30, 2009
#2
  • Jul 30, 2009
  • #2
I never said anything about it not working. Or is it a different Bill?
 

billfisher

Active Member
Jul 17, 2005
1,296
4
38
huntsville, AL
Jul 30, 2009
#3
  • Jul 30, 2009
  • #3
hes saying me. and check the threads i never said it the way he is characterizing it.
i said it wont work without the correct combination of part. the threads are so contradictory who knows what he use.d



i am glad to hear its running. i would not writeup a hodge podge for a swap sticky.
 

1stanger1

Member
Jul 3, 2005
172
1
17
in my house
Jul 30, 2009
#4
  • Jul 30, 2009
  • #4
doesnt matter what wiring harness you use just as long as it has enough wires....your gonna have to repin stuff or cut and tape either way any parts will work.......


now for my next swap........

found the perfect motor today.......i think its a 2007 i am not sure of the year but its a 5.4 supercharged lightning motor with like 20,000 miles on it

so the engine the harness and computer 2,500 not a bad deal

now if i can just find a nice LX notchback to put it in
and bill you didnt say hodge podge your right but you used alot more words and you alos said that my engine harness wouldnt work and you also told me to beat my firewall and to use the original mark 8 intake manifold...lol

but i dont think i used a bad combo all i did was put a 99 gt harness in a 99 V6 car and then hacked the **** out of it....lol

and the only reason i used the 96 MK8 pcm was because it is cheaper than the cobra PCM and better to use it than the 93 MK8 pcm so i made my 93 MK8 an obd II i dont see it as a bad deal....there is another forum that i belong too and there are people all the time doing the exact same thing but with a few different parts....you can use anything you want for christ's sake if you wanted to wire the whole car with speaker wire you could, it might catch on fire though but my point is its running and i did it my way used the parts i wanted to use and its running i prolly only got like a few weeks into it just in the evenings

which brings me to my conclusion, any one need a 96 cobra PCM or a 99 gt PCM with a superchip in it?
 
G

GT Tommy

New Member
Aug 15, 2008
190
0
0
Jul 30, 2009
#5
  • Jul 30, 2009
  • #5
Alan, thanks for the good words. Glad to be of some help. I knew you would get that engine going. It was just a matter of time! Good job and good luck with all your porjects, Tommy.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Jul 31, 2009
#6
  • Jul 31, 2009
  • #6
You know if you put a Lightning engine in a Fox with the supercharger still installed, you're going to need like a 10 inch cowl hood to clear the supercharger, right?
 
4

40oz

Member
Jan 9, 2006
499
3
18
Minneapolis
Jul 31, 2009
#7
  • Jul 31, 2009
  • #7
1stanger1 said:
doesnt matter what wiring harness you use just as long as it has enough wires....your gonna have to repin stuff or cut and tape either way any parts will work.......


now for my next swap........

found the perfect motor today.......i think its a 2007 i am not sure of the year but its a 5.4 supercharged lightning motor with like 20,000 miles on it

so the engine the harness and computer 2,500 not a bad deal

now if i can just find a nice LX notchback to put it in
and bill you didnt say hodge podge your right but you used alot more words and you alos said that my engine harness wouldnt work and you also told me to beat my firewall and to use the original mark 8 intake manifold...lol

but i dont think i used a bad combo all i did was put a 99 gt harness in a 99 V6 car and then hacked the **** out of it....lol

and the only reason i used the 96 MK8 pcm was because it is cheaper than the cobra PCM and better to use it than the 93 MK8 pcm so i made my 93 MK8 an obd II i dont see it as a bad deal....there is another forum that i belong too and there are people all the time doing the exact same thing but with a few different parts....you can use anything you want for christ's sake if you wanted to wire the whole car with speaker wire you could, it might catch on fire though but my point is its running and i did it my way used the parts i wanted to use and its running i prolly only got like a few weeks into it just in the evenings

which brings me to my conclusion, any one need a 96 cobra PCM or a 99 gt PCM with a superchip in it?
Click to expand...

holy crap, talk about missing the point.

What people are trying to tell you is that if you use the motor, harness, and computer from the same car, you will have a much easier time making things work. You know, without posting a new thread every day whining about how your ghetto hack job isn't running and you don't know why and nobody will tell you over the internet :/

Seriously, we could all do without you getting pissy when your questions are answered by people who are trying to help you and you reply back with the attitude of a 9 year old.

I'm glad you got your frankenstein running, but maybe be a bit less snotty to the people who made an effort to answer your questions despite your attitude.

One reason people suggest using the same motor, harness, and computer is because when you have an issue down the road you can easily diagnose it, rather than looking for which piece of electrical tape came undone, and WTH does this wire do, and why won't the damn thing fire any more?!? But you'll figure that out when you get done laughing at the people trying to help you.
 

1stanger1

Member
Jul 3, 2005
172
1
17
in my house
Jul 31, 2009
#8
  • Jul 31, 2009
  • #8
StangGT1995 said:
You know if you put a Lightning engine in a Fox with the supercharger still installed, you're going to need like a 10 inch cowl hood to clear the supercharger, right?
Click to expand...

i know... aint it great



and as a far as using same motor same harness same this that and what not
you use whatever parts are available to you and what you can afford....if you would have looked back at the other posts you would have seen that i got the MK8 for free and there was no way in hell i was using the pcm or harness from that car
 

GDawg

Founding Member
Mar 22, 2002
1,469
19
68
Nevada
Jul 31, 2009
#9
  • Jul 31, 2009
  • #9
Just have the supercharger sticking out of the hood!

This is a great thread!
 
You must log in or register to reply here.

Similar threads

Timing Cover/harmonic Balancer Removal And Replacement
  • jrichker
  • May 28, 2017
  • Fox 5.0 Mustang Tech
Replies
1
Views
16K
Fox 5.0 Mustang Tech Jul 6, 2024
Noobz347
  • Locked
mark 8 in 99 V6 IT'S ALIVE
  • 1stanger1
  • Jul 29, 2009
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
512
1996 - 2004 SN95 Mustang -General/Talk- Jul 29, 2009
1stanger1
The rematch (Or how I learned about nitrous....The hard way) only 1 left!
  • CarMichael Angelo
  • Jun 29, 2011
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 30, 2011
CarMichael Angelo
The Night of the Hurricane (a really long stupid story)
  • CarMichael Angelo
  • Jun 26, 2011
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 1, 2011
VibrantRedGT
M90 root blower how to info
  • 1987LXragtop
  • Jan 7, 2011
  • SN95 V6 Mustang Tech
Replies
1
Views
8K
SN95 V6 Mustang Tech Jan 7, 2011
1987LXragtop
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?