for a budget build craigslist and ebay are going to be your best friends.
i found people parting cars out and asked them for random parts that i didnt have. thats my best reccomendation.
for a budget build craigslist and ebay are going to be your best friends.
i found people parting cars out and asked them for random parts that i didnt have. thats my best reccomendation.
from what i understand the one from the gt will bolt right on but im not 100% sure. /////if you can get parts mark viii i would im stuck looking for ecm and air intake atm ! Cant seem to find one and im going to be using the 95 intake manifold(i hope) and because of that there are no K&N cold air intakes.
The gt pan will fit(4.6/5.4 all use same gasket), but you'll need the pick-up tube that matches the pan and the pump. I have one of those ecm's and possibly two more available, plus two complete engines(actually four, but we're using two). You might want to get wiring diagrams for your car and markIII to compare pin locations and circuits. I'm going to try and make a cai for a friends markIII some time soon when I find the right tubing.
yes it will its still a 4r70 the mark came with that trans from the factory.... any mod trans will fit that block after all they are all but identical (the block that is)
but if your looking to go 5 spd
T-45 with a 96 flywheel bolts right in there.......
good luck ....still waiting on my flywheel to get here had to get it off ebay
oh one more thing dont look for a remaned at autozone it wont be the right one!!!!